Theoretically it would be due to the ABs superior sensitivity.

Kevin Summers
KISTech Internet Services Inc.
www.kistech.com


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Gloria Vester
Sent: Monday, November 24, 2003 2:40 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Tranzeo CPE / APPO Compatibility


We have bought and installed three of the Trazeo TR-CPE, the low end
unit.  We run all APPOs on our water tower.  I am not sold on them yet,
they have been flaky in some locations and rock solid in others.  We had
two customers that were over 3 miles out that we had to change out the
Tranzeo with an ABT, but put those same two Trazeo's in other locations
and they are working great, but less 2 miles away from the tower.  We
never could figure out why they wouldn't work in those locations as the
ABT is theoretically lower power than the TR-CPE, but the ABT worked
where the Tranzeo didn't.  Don't know how much this helps, my opinion is
that I would use them if the location is within 3 miles and there is no
noise problems.

Regards,
Gloria

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ian Ellison
Sent: Monday, November 24, 2003 4:08 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] Tranzeo CPE / APPO Compatibility

Has anyone tried using the Tranzeo CPE units with an APPO?  Due to the
way too many headaches I'm having with ABO's needing reset (constantly),

I am venturing out and trying some new CPE until (and then, maybe) sB
can get some issues resolved.  I'm not even using APPO at my next AP,
but am using high-priced Alvarion equipment to test the stability.
However my other AP's are still running APPO's, so I'm wondering if
anyone else has tried this combination, or has any opinions on the
Tranzeo line of products.

Thanks,

Ian

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org



The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to