Re: [smartBridges] Setting up Equipment

Thu, 27 Nov 2003 19:08:20 -0800

Ok, let me take a stab at it -
 
Your Bandwidth End: (NOC Tower)
External Antenna - AirPoint Pro Outdoor - CAT-5 - Switch (or router)
 
CPE: (Your customers house)
External Antenna - AirBridge Outdoor - CAT 5 - computer (or router)
 
There is no LMR in this setup other than what comes on the antenna (if any). When you order your antenna, ensure it has the correct N connector. For example: an Andrews 24dB Grid comes with 18 inches of LMR400 and either an N Female or N Male connector.
 
If you order an antenna that simply has an N connector and you need some LMR to connect the antenna to the radio, simply make the appropriate length of LMR using the correct connectors.
 
In you description below, I didn't really understand your question because you mention something about what appears to be that you want to connect an AP directly to a CPE using LMR???
 
Hope this helps or please explain further
 
Michael
----- Original Message -----
Sent: Thursday, November 27, 2003 7:52 PM
Subject: RE: [smartBridges] Setting up Equipment

That airbridge isn�t going to be detected inside someone�s house from a tower a few miles away. I already have good prices on the cables, crimps, tools, etc of what ill need there� It�s just the understanding, or lack thereof of the system setup. I understand how it works� I�ve gotten everything understood till I reach the clients house.

-Sean Duaine

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell
Sent: Thursday, November 27, 2003 7:44 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Setting up Equipment

 

Welcome  Sean.

 

Some radios come with antennas built in but the airbridge is stand alone.  See them here http://www.smartbridges.com/new/products/ab.php.  There is an indoor and an outdoor units.

 

As for pricing on brackets, cable, antennas, crimps and tools.  You will have to look everywhere!  I get my stuff from these guys.

 

www.ebay.com    Yes eBay!

 

 

Have fun building out.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Sean Duaine
Sent: Thursday, November 27, 2003 8:35 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] Setting up Equipment

Please excuse my ignorance & stupidity on this, I�ve looked for several hours on google and I can�t find a straight answer. We are currently getting costs numbers to deploy our wisp. We have decided to use SmartBridges equipment. My question is this� >From the antenna on the tower, the signal is sent down to the CPE (airbridge??) that is outside... from here we run a LMR400 cable to the airPoint (with Ethernet)? Also when I was previously looking at Raylink they had the pizza box like dishes outside. Is that also what the airbridge is? Or is that another piece of equipment that will be bought? Again, please excuse how stupid this may sound, but I can�t find any resources on this and were trying to figure out how much many we are going to need for deployment. I also realize we will need mounting brackets, cable, switches, and other equipment. But I�m just trying to get the prices for the equipment here.

-Thanks

            Sean Duaine

Reply via email to