The LaCie Rugged Mini is not in the List of suported Devices.

Product details: http://www.lacie.com/ch/products/product.htm?id=10564

linux-5xcq:~ # smartctl  -a /dev/sdc
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.1.10-1.16-desktop] (SUSE RPM)
/dev/sdc: Unknown USB bridge [0x059f:0x1051 (0x000)]
Smartctl: please specify device type with the -d option.


linux-5xcq:~ # smartctl -d usbjmicron,x  -a /dev/sdc
Smartctl open device: /dev/sdc [USB JMicron] failed: scsi error unsupported 
scsi opcode

linux-5xcq:~ # lsusb -v
[...]
Bus 002 Device 006: ID 059f:1051 LaCie, Ltd 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x059f LaCie, Ltd
  idProduct          0x1051 
  bcdDevice            0.00
  iManufacturer           2 LaCie
  iProduct                3 Rugged Mini USB 3
  iSerial                 1 000000000522a5ee30c2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Status:     0x0001
  Self Powered


linux-5xcq:~ # smartctl -d sat  -a /dev/sdc
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.1.10-1.16-desktop] (SUSE RPM)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2XQJ9AC706802
LU WWN Device Id: 5 0004cf 207fa0e9d
Firmware Version: 2AR10002
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sat Dec  1 20:18:36 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: 
Disabled.
Self-test execution status:      (   0) The previous self-test routine 
completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (12960) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 216) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       
-       0
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       
-       0
  3 Spin_Up_Time            0x0023   086   086   025    Pre-fail  Always       
-       4472
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       6
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       
-       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      
-       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       2
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       6
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       
-       0
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       
-       0
194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       
-       33 (Min/Max 22/33)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       
-       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x002a   252   252   000    Old_age   Always       
-       0
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       
-       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       
-       30

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no 
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been 
run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to