Hi, I am using a USB to mSATA SSD board “Pi-102” manufactured by Lycom (http://www.lycom.com.tw/Pi-102.htm)
The Pi-102's USB bridge chip is upd720231A manufactured by Renesas (https://www.renesas.com/en-eu/products/usb-assp/upd720231a.html) I’m running Smartmontools on a Raspberry Pi 3, and when I run: $ sudo smartctl --all /dev/sda -s on …I expected to see a detailed report of the drive data, but instead I got: /dev/sda: Unknown USB bridge [0x045b:0x0229 (0x000)] Please specify device type with the -d option. Use smartctl -h to get a usage summary Reading through the Smartmontools support archive, it appears that the Renesas upd720231A USB bridge is listed, but with a different idVendor:idProduct (0x045b:0x022a): https://sourceforge.net/p/smartmontools/mailman/message/34792018/ …and in a changeset on the smartmontools.org site: https://www.smartmontools.org/changeset/4303 How do I go about getting the USB bridge I’m using added so that I can use Smartmontools for SSDs connected via the Lycom Pi-102, please? Many thanks, Colin ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
