On Fri, Apr 11, 2014 at 10:22 PM, Joshua M. Clulow <
[email protected]> wrote:
> Is this a rebadged LSI card that uses the "mpt_sas" driver? If so,
> you can likely find some details about the port numbers by running:
>
> mdb -k -e "::mptsas -t"
>
That did the trick:
The SCSI target information
devhdl 9, sasaddress 50014ee0abec1063, phymask 10,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
7
devhdl a, sasaddress 50014ee0ac22159f, phymask 20,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
6
devhdl b, sasaddress 5000c5001172fc5d, phymask 40,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
5
devhdl c, sasaddress 5000c5000e323437, phymask 80,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
4
devhdl d, sasaddress 5000c5000dde3d5a, phymask 4,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 4, enclosure 1, slot_num
1
devhdl e, sasaddress 5000c5001ec0600f, phymask 1,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
3
devhdl f, sasaddress 5000c5000dde814b, phymask 2,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
2
devhdl 10, sasaddress 5000c50011f082e2, phymask 8,devinfo
881
throttle 20, dr_flag 0, m_t_ncmds 0, enclosure 1, slot_num
0
This actually makes sense now based upon what I was seeing from the format
command. I have the cabling all screwed up, which is why I was getting
confused about which disks I was working with in my pool.
Thanks.
Greg
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
