On Apr 11, 2014, at 9:52 PM, Greg Zartman <[email protected]> 
wrote:

> I started to ask this question once before, but didn't follow up.
> 
> I have a zpool that looks like this:
> 
> [root@LEI-SmartOS ~]# zpool status                                            
>                       
>   pool: zones                                                                 
>                       
>  state: ONLINE                                                                
>                       
>   scan: none requested                                                        
>                       
> config:                                                                       
>                       
>                                                                               
>                       
>         NAME                       STATE     READ WRITE CKSUM                 
>                       
>         zones                      ONLINE       0     0     0                 
>                       
>           mirror-0                 ONLINE       0     0     0                 
>                       
>             c0t5000C5000E323437d0  ONLINE       0     0     0                 
>                       
>             c0t5000C5001172FC5Dd0  ONLINE       0     0     0                 
>                       
>           mirror-1                 ONLINE       0     0     0                 
>                       
>             c0t50014EE0ABEC1063d0  ONLINE       0     0     0                 
>                       
>             c0t50014EE0AC22159Fd0  ONLINE       0     0     0                 
>                       
>           mirror-2                 ONLINE       0     0     0                 
>                       
>             c0t5000C5000DDE3D5Ad0  ONLINE       0     0     0                 
>                       
>             c0t5000C50011F082E2d0  ONLINE       0     0     0                 
>                       
>           mirror-3                 ONLINE       0     0     0                 
>                       
>             c0t5000C5000DDE814Bd0  ONLINE       0     0     0                 
>                       
>             c0t5000C5001EC0600Fd0  ONLINE       0     0     0                 
>                       
>                                                                     
> 
> These drives are sitting in a Supermicro 2U 12-bay chassis with a 
> BPN-SAS-825TQ SAS/SATA Backplate

That backplane uses an American Megatrends MegaRAC MG 9072 SES controller.
The limitations of that controller is that the SES-2 interfaces are via SGPIO 
or I2C from the HBA.
You'll need to make sure those connections are in place. According to SMC, 
you'll need to connect
the SGPIO (aka Sideband Headers) to the HBA. I'm not familiar enough with the 
IBM HBA to know
how to connect to it. Without those connections, you won't be able to manage 
the locator LEDs.

Joyent has added some HBA-oriented LED code for failures. Perhaps someone from 
Joyent can
add more info.
-- richard

> 
> My SAS/SATA controllers are 2 x IBM SERVERAID M1015 crossflashed to IT mode 
> (i.e., pass-through).
> 
> I've wired the IBM M1015's to the backplate in what I believe is the correct 
> order so the drive bay numbers on the backplate match the drive order on the 
> raid card.  However, I'm not entirely sure how to verify this.
> 
> Question:  What is the best way for me to know where a failed drive is 
> located in the chassis?  Perhaps the backplate/raid card are smart enough to 
> light up the red error LED when a drive fails, but I'm not certain of this.  
> 
> Thanks,
> 
> Greg
> 
> 
> smartos-discuss | Archives  | Modify Your Subscription         

--

[email protected]
+1-760-896-4422






-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription: 
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com

Reply via email to