NIC in VBox is set to bridging interface and promise mode set to 'Allow All'. And the logged in user has write access to /dev/net/net0 But still the zone can't reach the outer world On 25 May 2014 12:41, "Daniel Malon" <[email protected]> wrote:
> Hi, > > the bridge should be created for VirtualBox: > https://github.com/joyent/smartos-live/blob/master/overlay/generic/lib/svc/method/net-physical#L273-278 > > If you have set the NIC in VirtualBox to a bridging interface and allow > promise mode you should be all set up. > Some people tho have problems with VirtualBox where the GZ gets network > connected but every created zone can’t reach the outer world. > > Check if your logged in user has write access to the VirtualBox network > device in /dev as well. > > — > Daniel > > On 25 May 2014, at 08:05, Ganapathy S A via smartos-discuss < > [email protected]> wrote: > > Hi Yu, > > Thanks for the reply. Did as you said, but no help! Also, only the > *delete-bridge* effect is persistent across reboots but not > *create-bridge*! How to make the *create-bridge* effect persistent across > reboots? > > Regards, > Ganapathy > > > On 25 May 2014 06:34, Yu Li <[email protected]> wrote: > >> Hi, Ganapathy >> >> If you are in a zone, and with VirtualBox, you may need to do some tweak >> as default SmartOS only setup for VMware. >> >> Some info here: >> http://wiki.smartos.org/display/DOC/How+to+create+a+Virtual+Machine+in+SmartOS >> >> Quick steps: >> >> delete the vmwarebr first >> >> dladm remove-bridge -l e1000g0 vmwarebr >> dladm delete-bridege vmwarebr >> >> then create a vboxbr and link to the main nic >> >> dladm create-bridge -l e1000g0 vboxbr >> >> hope help :) >> >> >> On Sun, May 25, 2014 at 4:08 AM, Ganapathy S A via smartos-discuss < >> [email protected]> wrote: >> >>> >>> I am a newbie SmartOS (Unix) user! Trying to setup a zone for web app >>> development in SmartOS >>> (running inside VBox with host as Ubuntu >>> ) >>> . Followed the instructions in this >>> page<http://wiki.smartos.org/display/DOC/How+to+create+a+zone+%28+OS+virtualized+machine+%29+in+SmartOS> >>> and successfully created a zone & able to login as well. But network >>> is down inside the zone & hence*pkgin up* fail >>> s! Output of *dladm show-phys*, *dladm show-link*, and json content >>> has been attached (smartos-snap-gz). Output of *dladm show-phys*,*dladm >>> show-link* inside the zone also has been attached (smartos-snap-nongz). >>> What configuration did I miss? Any help is much appreciated. >>> >>> P.S: I am not sure if this is the right place to seek this kind of help, >>> if not kindly guide me in the right direction. >>> >>> Thanks & >>> Regards, >>> Ganapathy >>> S Avathan >>> *smartos-discuss* | >>> Archives<https://www.listbox.com/member/archive/184463/=now> >>> <https://www.listbox.com/member/archive/rss/184463/26082834-0fa1717f> >>> | Modify <https://www.listbox.com/member/?&;> Your >>> Subscription<http://www.listbox.com/> >>> >> >> > *smartos-discuss* | > Archives<https://www.listbox.com/member/archive/184463/=now> > <https://www.listbox.com/member/archive/rss/184463/21955186-c7d24c67> | > Modify<https://www.listbox.com/member/?&;> > Your Subscription <http://www.listbox.com/> > > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
