Hi all, I’ve researched this problem and get some new information. Now the problem is, when the machine execute "ifconfig bge2 plumb”, the machine will reboot. I modified the installation script and skip this command, then I can successfully install smartos in this server. Although then it is failed to start, maybe there have another command in start script. So I think there may be some problem with bge2, but, I can install centos7 in this machine and all nics work fine. Any idea?
> On Dec 23, 2015, at 5:56 PM, 许若辰 <[email protected]> wrote: > > Hi friends, I got a strange problem while installing smartos on a hp proliant > dl388 gen9 server and I wonder why or whether anyone have similar experience. > The machine will auto reboot when the system is loading, after the version is > shown, also I will get a KCS error: ff. > But, I can use noinstall mode and login to the system, then configure the > network and create zpool based on the hard disk. Also I can get a KCS error > while loading. > When I use the smart array, only creating a raid0 for each hard disk and > using newest smartos can work(disk can’t be found when raid 0 for all disk or > hba mode or an old version of smartos). When I use lsi hba card, disks can > always be found. > > The configuration of the server > bios version P89 v1.40(2015/5/6) > boot mode legacy bios mode > memory 32g > processor1 & 2 intel(r) xeon(r) cpu e5-2620 v3 @ 2.40ghz > hba card smart array p440ar controller or > lsi corp 2308 sas controller > nic hp ethernet 1gb 4-port 331i adapter > > thanks > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
