I took a whack at it w/ home desktop w/ a fairly old NEC/Renesas: https://gist.github.com/Scandalon/bfa285e4e8379a387c09cc8089653323
Surprisingly it booted off the USB3 port, but after that, no dice. Results were the same booted off USB2 port, as well - plugging in any spec device to the USB3 ports didn't register at all. (Note it was UEFI mode, if that matters.) On Fri, Nov 18, 2016 at 1:26 PM, Robert Mustacchi <[email protected]> wrote: > Hi, > > We are about to wrap the initial set of USB 3.x support. If you have > some additional cycles to perform some testing of this (regardless of if > your system has USB 3 or not), we'd appreciate it. > > If you do test it, and things are working, it'd help me if you could > share the output of the following two commands for my notes: > > mdb -ke '::prtusb' > prtconf -dD | grep -i xhci > > SmartOS builds: > > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos/platform-20161117T180610Z.tgz > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos/platform-20161117T180610Z.iso > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos/platform-20161117T180610Z.usb.bz2 > > SmartOS debug builds: > > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos-dbg/platform-20161116T183444Z.tgz > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos-dbg/platform-20161116T183444Z.iso > https://us-east.manta.joyent.com/rmustacc/public/preview/ > xhci/20161110/smartos-dbg/platform-20161116T183444Z.usb.bz2 > > Thanks, > Robert > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
