Also, along the same lines, what's the status/roadmap for USB 3.1/Thunderbolt support?
On Mon, Nov 28, 2016 at 8:01 AM, Matthew Parsons < [email protected]> wrote: > Thanks - sorry for the delay, I was mostly off work mode for the holiday, > plus testing requires rebooting my main home machine. :P I'll try and watch > the boot console for anything - when booting in unconfigured mode, I assume > /var/log/syslog or similar is still valid? > > Is there a list of chipsets you (are planning to) support? (I assume > there's a github section or somesuch to peruse, but my ability to parse > that is uncertain.) > > On Mon, Nov 21, 2016 at 6:31 PM, Robert Mustacchi <[email protected]> wrote: > >> On 11/21/16 18:24 , Matthew Parsons wrote: >> > I took a whack at it w/ home desktop w/ a fairly old NEC/Renesas: >> > >> > https://gist.github.com/Scandalon/bfa285e4e8379a387c09cc8089653323 >> > >> > Surprisingly it booted off the USB3 port, but after that, no dice. >> Results >> > were the same booted off USB2 port, as well - plugging in any spec >> device >> > to the USB3 ports didn't register at all. (Note it was UEFI mode, if >> that >> > matters.) >> >> Hi Matthew, >> >> Thanks for the report. It looks like we didn't successfully attach the >> device. I suspect this is for the same reason that it didn't work for >> another user which is because the xHCI version was a bit too old for >> what we had there initially. Was there a log message by chance about an >> unsupported version? >> >> I was able to give the other person a custom patch that showed it >> worked. Hopefully we'll be able to get some new test bits out soon that >> have that incorporated. But I suspect that's the problem you're having >> and why none of the ports work. >> >> Robert >> >> > On Fri, Nov 18, 2016 at 1:26 PM, Robert Mustacchi <[email protected]> >> wrote: >> > >> >> Hi, >> >> >> >> We are about to wrap the initial set of USB 3.x support. If you have >> >> some additional cycles to perform some testing of this (regardless of >> if >> >> your system has USB 3 or not), we'd appreciate it. >> >> >> >> If you do test it, and things are working, it'd help me if you could >> >> share the output of the following two commands for my notes: >> >> >> >> mdb -ke '::prtusb' >> >> prtconf -dD | grep -i xhci >> >> >> >> SmartOS builds: >> >> >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos/platform-20161117T180610Z.tgz >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos/platform-20161117T180610Z.iso >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos/platform-20161117T180610Z.usb.bz2 >> >> >> >> SmartOS debug builds: >> >> >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos-dbg/platform-20161116T183444Z.tgz >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos-dbg/platform-20161116T183444Z.iso >> >> https://us-east.manta.joyent.com/rmustacc/public/preview/ >> >> xhci/20161110/smartos-dbg/platform-20161116T183444Z.usb.bz2 >> >> >> >> Thanks, >> >> Robert >> >> >> > >> > >> >> > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
