Hi Ante, I have nothing fast I can suggest. So I'm going to reach out to SMCI, but could you perhaps send me your current BIOS revision so I can include that information when I reach out to them?
Thanks, Robert On 12/28/16 8:50 , Ante Vojvodic wrote: > Hi Robert, > > I tried to send break, but kernel is stuck. Can't get to debugger. > SOL output: > load 'drv/kb8042' id 97 loaded @ 0xfffffffff7c5f000/0xffffffffc0001078 size > 10360/3464 > installing kb8042, module id 97. > ~B [send break] > ~B [send break] > ~B [send break] > > > Do you have any other idea to try? > > --- > Ante > > > On Wed, Dec 28, 2016 at 4:34 PM, Robert Mustacchi <[email protected]> wrote: > >> Hi Ante, >> >> Sorry, I hadn't realized you had booted with -kd. Normally when you >> inject an nmi that works just fine and it traps into kmdb. Hmm. May be >> worth just trying to inject a normal break (if on the ipmi serial you >> can usually use ~b to get into it). If that doesn't work, let me know >> and I'll try and put together some more involved instructions on >> breaking and get some time to dig further into the stack trace to see if >> I might be able to manually put together what I/O port we're writing to >> so I can follow up with SMCI. >> >> Robert >> > > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
