On Fri, May 19, 2017 at 11:59:56AM -0700, apg wrote: > Hello, > > I've installed SmartOS 20170413T062226Z on a blade (PowerEdgeM610). Vlan > tagged interfaces come up just fine, can ping, ssh, etc, but they cannot > transfer any kind of data to it. rsync, scp, curl, transfers to the smartos > host all hang, choke, puke, die. > > Untagged vlan traffic works just fine. > > Broadcom nics. prtdiag: > --- --------- ---------------- ---------------------------- > 1 in use PCI Exp. Gen 2 MEZZ1_FAB_C , Broadcom Limited NetXtreme II > BCM5709S Gigabit Ethernet (bnx) > 3 in use PCI Exp. Gen 2 MEZZ2_FAB_B , Broadcom Limited NetXtreme II > BCM5709S Gigabit Ethernet (bnx) > > Has anyone had similar experience?
I installed centos 6 on the same blade, used the same settings on the switch, same (similar) commands on nics, ran the same commands, it worked just fine. here's the net parts of /usbkey/config: admin_nic=00:10:18:59:24:78 admin_ip=10.10.0.238 admin_netmask=255.255.254.0 admin_network= admin_gateway=10.10.1.254 v803pvt_nic=00:23:AE:FD:A3:F8 v803pvt0_ip=10.3.1.211 v803pvt0_netmask=255.255.254.0 v803pvt0_vlan_id=803 Driver issue? Thanks! -al --------------------------------------------------------------- no switchport access vlan --------------------------------------------------------------- ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
