On 5/19/17 16:58 , apg wrote: > On Fri, May 19, 2017 at 11:59:56AM -0700, apg wrote: >> Hello, >> >> I've installed SmartOS 20170413T062226Z on a blade (PowerEdgeM610). Vlan >> tagged interfaces come up just fine, can ping, ssh, etc, but they cannot >> transfer any kind of data to it. rsync, scp, curl, transfers to the smartos >> host all hang, choke, puke, die. >> >> Untagged vlan traffic works just fine. >> >> Broadcom nics. prtdiag: >> --- --------- ---------------- ---------------------------- >> 1 in use PCI Exp. Gen 2 MEZZ1_FAB_C , Broadcom Limited NetXtreme II >> BCM5709S Gigabit Ethernet (bnx) >> 3 in use PCI Exp. Gen 2 MEZZ2_FAB_B , Broadcom Limited NetXtreme II >> BCM5709S Gigabit Ethernet (bnx) >> >> Has anyone had similar experience? > > I installed centos 6 on the same blade, used the same settings on the switch, > same (similar) commands on nics, ran the same commands, it worked just fine. > > here's the net parts of /usbkey/config: > admin_nic=00:10:18:59:24:78 > admin_ip=10.10.0.238 > admin_netmask=255.255.254.0 > admin_network= > admin_gateway=10.10.1.254 > > v803pvt_nic=00:23:AE:FD:A3:F8 > v803pvt0_ip=10.3.1.211 > v803pvt0_netmask=255.255.254.0 > v803pvt0_vlan_id=803 > > Driver issue?
I suspect that this may be https://www.illumos.org/issues/4175. Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
