can smsLib communicate with usb port? (it's out of the topic) I use serial 2 usb converter and than dmesg show usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: new device found, idVendor=1a86, idProduct=7523 usb 1-2: new device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-2: Product: USB2.0-Ser! usb 1-2: configuration #1 chosen from 1 choice my questions is how to know which port in use?
thanks. On Mon, Jul 20, 2009 at 4:07 PM, Pietro <[email protected]> wrote: > > Thanks for your response Thanasis. I figured so :). > Looking deeper in SMSlib, but until now I like what I see. > > Thanks again. > > On Jul 20, 11:13 am, Thanasis <[email protected]> wrote: > > Hi, > > > > > If i use the 2 serials port (see they are mapped to 2 different > > > devices), configuring them as 2 gateways, can I get double send > > > velocity?. (Think not but.....) > > > > Nice try, but no! :) > > > > I don't know what exactly are the other ports you see, but with SMSLib > > you can *only* use the serial devices (i.e. one of the ACM0 or ACM1, > > whichever is the appropriate one). > > > -- ----------------------------------------- Hendra Cengala Keep Moving Forward --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SMSLib User Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/SMSLib?hl=en -~----------~----~----~----~------~----~------~--~---
