Hi Marcos, The modem I have has a USB interface, may be I am specifying the model wrong, will have to check this out. Also I tried both programs on it - ReadMessages & SendMessage - but it does not work. Let me fish around for more.
Regards, Alok. On Tue, Oct 25, 2011 at 1:44 PM, Marcos Truchado <[email protected]>wrote: > HI again Alok > > I just check that the Q2403 is a RS232 based device, therefore my handler > is not suitable for your modem. Go for the standard Wavecom one, I'm 99,9% > sure that It will do the job. > > Best regards. > > Marcos. > > > On Tue, Oct 25, 2011 at 10:11 AM, Marcos Truchado < > [email protected]> wrote: > >> Hi Alok >> >> I would suggest you to try first with the standard Wavecom handler (use >> Wavecom as a manufacturer and leave the model blank) to see how It is >> working. If it works out of the box, then there is nothing else to do. If it >> fails, then, maybe you need an specific handler. >> >> Best regards. >> >> Marcos. >> >> >> On Tue, Oct 25, 2011 at 10:06 AM, alok vaidya <[email protected]> wrote: >> >>> Hi Marcos, >>> >>> It's great of you to write back, clearing quite a few things. But there's >>> one thing why I found that the document would help me, I have (after trying >>> with my phone and one other modem I have) bought the Wavecom Q2403 (In India >>> we are still to get any of the Sierra Wireless devices) Vendors still have >>> the Wavecom ones. So I thought may be the handler written by you could point >>> me in the right direction. Anyways I will check it in the repo. Also other >>> thing is I won't be going ahead with the writing of the handler, first I am >>> going to spend some time with the source code of smslib to try to figure out >>> where exactly the problem lies, may be after I find the problem I would be >>> in a better position to take a decision of what path to take next. >>> >>> Thanks and Regards, >>> Alok. >>> >>> >>> On Tue, Oct 25, 2011 at 11:27 AM, Marcos Truchado < >>> [email protected]> wrote: >>> >>>> Hi Alok >>>> >>>> Just the fact that I was able to write a handler for my Wavecom to fix a >>>> few very well documented issues that the new models have with the USB port, >>>> doesn't convert me in an expert on this area. My handler is in fact the old >>>> and well know default handler for Wavecom with a very few modifications >>>> that >>>> were causing my modem to hand in certain circumstances when I attached it >>>> with an USB port, and they were even well documented. >>>> >>>> Don't ever waste your time getting the specification that I put in my >>>> older post, It is useless for you. This specification contains the standard >>>> AT commands and the propietary AT commands supported by Wavecom industrial >>>> modems, which doesn't mean that they are supported in your Samsung Corby. >>>> >>>> As a general rule: forget about mobile phones, at least in my experience >>>> they are completely useless, and I don't thing that you are going to be >>>> able >>>> to find the documentation for the modem of this phone, and even if you are >>>> able to, It is a lot of work to get it working. Go instead for an >>>> industrial >>>> device. >>>> >>>> I did a few tries with a samsung c3300k, and the modem of this phone >>>> should be almost the same as the one as your corby. The result is that in >>>> some very well know, standard and documented AT commands the modem just >>>> doesn't provide any response at all. >>>> >>>> If you are still interested on my handler, as T. Delenikas told in a >>>> previous post, It is already part of the repository. >>>> >>>> Best regards. >>>> >>>> Marcos. >>>> >>>> >>>> On Tue, Oct 25, 2011 at 6:22 AM, alok vaidya <[email protected]> wrote: >>>> >>>>> Hi Marcos, >>>>> >>>>> Would you be able to pass me over the handler code that you wrote, so >>>>> that I could take a look at it since I am planning I would have to do >>>>> something similar. The issue is I am not being to communicated with any of >>>>> my three modems with the ReadMessages or the SendMessage programs. I tried >>>>> using my Phone Samsung Corby Pro (B5310), A GSM/GPRS modem that I have >>>>> Proliifc Technologies' PL2303 and had no luck. On reading some of the >>>>> posts >>>>> on the mailing list I found out that Wavecom/Sierra Wireless modem work >>>>> most >>>>> smoothly with the lib so I went ahead and bought a Wavecom Q2403 but that >>>>> seems not to be working too. >>>>> >>>>> I am trying to download the AT Command document you have referred to in >>>>> one of your posts, but the download seems to stopping mid-way everytime, >>>>> so >>>>> if you can attache that too or mention another link it would be great. >>>>> >>>>> If you want the details of the issues I am facing, you can take a look >>>>> at the topic "Issues while using SMSlib" posted by me. >>>>> Here's a link to it: >>>>> http://groups.google.com/group/smslib/browse_thread/thread/20f5bdf2f6cb10a2 >>>>> >>>>> Regards, >>>>> Alok. >>>>> >>>>> >>>>> On Mon, Oct 24, 2011 at 8:41 PM, Marcos Truchado < >>>>> [email protected]> wrote: >>>>> >>>>>> Hi: >>>>>> >>>>>> The way that the Wavecom modem handle the AT commands is almost >>>>>> identical in in both the old and the new ones. I noticed that a few AT >>>>>> commands were hanging the modem and you need to do a hard reset to set >>>>>> the >>>>>> modem back to accept AT commands. To avoid that, I used the official >>>>>> Wavecom >>>>>> specification sheet to build a new handler to support this functionality, >>>>>> and It is working and will be part in the future release of SMSLib as >>>>>> far as >>>>>> I know because a previous discussion I had with T.Delenikas. When?, I >>>>>> don't >>>>>> know. >>>>>> >>>>>> Please note that this limitation, according to the official Wavecom >>>>>> spec, only appears when you use one of the new models via an USB >>>>>> connection. >>>>>> Using the d-sub 15 pin connection should not end with those issues, >>>>>> therefore my handler is not required and you can safety use the generic >>>>>> one >>>>>> for Wavecom. >>>>>> >>>>>> I was able to use my old motorola L6 with SMSLib in the meantime that >>>>>> I was trying to get my FXT009 handler to work, and It works fantastic, >>>>>> but >>>>>> the problem is that this modem was laying in a box for at least 3 years, >>>>>> so >>>>>> I don't think you can be able of buying a new one. >>>>>> >>>>>> As I said, I had a really good experience with Wavecom, the specs are >>>>>> easy to find, the AT command support list is quite standard and It >>>>>> works, at >>>>>> least for me, perfect. IMHO this is the way to go. >>>>>> >>>>>> Best regards. >>>>>> >>>>>> Marcos. >>>>>> >>>>>> >>>>>> On Mon, Oct 24, 2011 at 4:53 PM, [email protected] < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Dear Marcos, >>>>>>> >>>>>>> Thank you for all of the information! >>>>>>> >>>>>>> Unfortunately I do not want to use something that is not officially >>>>>>> supported yet, just in case any issue's arise while using this modem. >>>>>>> I will definitely keep that model on the list of possibilities once >>>>>>> the new 3.5.1 SMSLib is released. Do you know when this version may >>>>>>> be released? >>>>>>> >>>>>>> Lastly, are there any other USB Modems that are fully compatible with >>>>>>> the current version? >>>>>>> >>>>>>> Thank you, >>>>>>> >>>>>>> Matt >>>>>>> >>>>>>> On Oct 24, 8:53 am, Marcos Truchado <[email protected]> >>>>>>> wrote: >>>>>>> > Hi: >>>>>>> > >>>>>>> > It is a Sierra wireless FXT009 >>>>>>> > >>>>>>> > >>>>>>> http://www.sierrawireless.com/Support/Downloads/AirLink/Programmable_. >>>>>>> .. >>>>>>> > >>>>>>> > Currently I'm developing an application using it. With the latest >>>>>>> 3.5.1 >>>>>>> > version of SMSLib this modem is not supported. However I was able >>>>>>> to create >>>>>>> > a handler that works perfectly. I contact with T. Delenikas and I >>>>>>> sent him >>>>>>> > the full project and he told me that this handler will be included >>>>>>> in a >>>>>>> > future release of SMSLib, so expect it to be soon released, or if >>>>>>> you are on >>>>>>> > a hurry I can send to you a modified version of the 3.5.1 with the >>>>>>> handler >>>>>>> > included that supports this modem. The handler I wrote also should >>>>>>> be >>>>>>> > compatible with the FXT002, but I don't have this modem so I can't >>>>>>> say. >>>>>>> > >>>>>>> > Best regards. >>>>>>> > >>>>>>> > Marcos. >>>>>>> > >>>>>>> > On Mon, Oct 24, 2011 at 2:48 PM, [email protected] < >>>>>>> [email protected]>wrote: >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > > Hello Marcos, >>>>>>> > >>>>>>> > > Thank you for the information, which model modem did you >>>>>>> purchase? >>>>>>> > > And was it a Wavecom modem or a Sierra Wireless model modem? >>>>>>> > >>>>>>> > > Thanks again, >>>>>>> > >>>>>>> > > Matt >>>>>>> > >>>>>>> > > On Oct 19, 3:29 pm, Marcos Truchado <[email protected]> >>>>>>> wrote: >>>>>>> > > > Hi: >>>>>>> > >>>>>>> > > > Go for Wavecom. I had the same problem that you, and finally I >>>>>>> bought one >>>>>>> > > > Wavecom (as you said manufactured now by sierra wireless) and >>>>>>> It is >>>>>>> > > working >>>>>>> > > > perfectly with SMSLib. >>>>>>> > >>>>>>> > > > Best regards. >>>>>>> > >>>>>>> > > > Marcos. >>>>>>> > >>>>>>> > > > On Wed, Oct 19, 2011 at 9:27 PM, [email protected] < >>>>>>> > > [email protected]>wrote: >>>>>>> > >>>>>>> > > > > Hello, >>>>>>> > >>>>>>> > > > > Does anyone have a more updated list of USB (not RS232 >>>>>>> Serial) GSM >>>>>>> > > > > Modems that are compatible with SMSLib? >>>>>>> > >>>>>>> > > > > The current list, seen here: >>>>>>> http://smslib.org/doc/compatibility/, is >>>>>>> > > > > very outdated, for example, I know Wavecom has since been >>>>>>> bought out >>>>>>> > > > > by Sierra Wireless, so do any of their USB GSM Modem's work >>>>>>> with >>>>>>> > > > > SMSLib without error's? >>>>>>> > >>>>>>> > > > > If no one has an updated list, what would be a good >>>>>>> recommended USB >>>>>>> > > > > GSM Modem to use with SMSLib? >>>>>>> > >>>>>>> > > > > Thanks in adv. >>>>>>> > >>>>>>> > > > > --Matt >>>>>>> > >>>>>>> > > > > -- >>>>>>> > > > > You received this message because you are subscribed to the >>>>>>> Google >>>>>>> > > Groups >>>>>>> > > > > "SMSLib Discussion Group" group. >>>>>>> > > > > To post to this group, send email to [email protected] >>>>>>> . >>>>>>> > > > > To unsubscribe from this group, send email to >>>>>>> > > > > [email protected]. >>>>>>> > > > > For more options, visit this group at >>>>>>> > > > >http://groups.google.com/group/smslib?hl=en. >>>>>>> > >>>>>>> > > -- >>>>>>> > > You received this message because you are subscribed to the >>>>>>> Google Groups >>>>>>> > > "SMSLib Discussion Group" group. >>>>>>> > > To post to this group, send email to [email protected]. >>>>>>> > > To unsubscribe from this group, send email to >>>>>>> > > [email protected]. >>>>>>> > > For more options, visit this group at >>>>>>> > >http://groups.google.com/group/smslib?hl=en. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "SMSLib Discussion Group" group. >>>>>>> To post to this group, send email to [email protected]. >>>>>>> To unsubscribe from this group, send email to >>>>>>> [email protected]. >>>>>>> For more options, visit this group at >>>>>>> http://groups.google.com/group/smslib?hl=en. >>>>>>> >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "SMSLib Discussion Group" group. >>>>>> To post to this group, send email to [email protected]. >>>>>> To unsubscribe from this group, send email to >>>>>> [email protected]. >>>>>> For more options, visit this group at >>>>>> http://groups.google.com/group/smslib?hl=en. >>>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "SMSLib Discussion Group" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to >>>>> [email protected]. >>>>> For more options, visit this group at >>>>> http://groups.google.com/group/smslib?hl=en. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "SMSLib Discussion Group" group. >>>> To post to this group, send email to [email protected]. >>>> To unsubscribe from this group, send email to >>>> [email protected]. >>>> For more options, visit this group at >>>> http://groups.google.com/group/smslib?hl=en. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "SMSLib Discussion Group" group. >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to >>> [email protected]. >>> For more options, visit this group at >>> http://groups.google.com/group/smslib?hl=en. >>> >> >> > -- > You received this message because you are subscribed to the Google Groups > "SMSLib Discussion Group" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/smslib?hl=en. > -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
