Dear Marcos, Oh, my apologies, I didn't realize it had a USB port for connectivity, that's good to know.
After looking into these embedded/industrial device's it seems they may be a bit more than I need at this time. Do you know if any of the AirCard USB Modem's will work just as well as the FXT009? I know these USB Modems do also accept AT Commands for input, and are made by the same company. They are more in line for the type of usage I will be doing with SMSLib. Thank you, --Matt On Oct 25, 10:10 am, Marcos Truchado <[email protected]> wrote: > Hi Matt > > I have just here on my table a Fastrack FXT009. It has 2 serial interfaces, > an USB port and a sub-d 15 serial connector. This latest one is the same > that the one you can find in the VGA. > > FXT009 is definitively supported, for FXT002 I'm 99,9% sure that It will > work to, as far as the reference AT command list is the same for both. You > shouldn't have any difficulties to get there in the USA. At least here in > Europe It is quite easy to find. > > http://www.sierrawireless.com/Support/Downloads/AirLink/Programmable_... > > Best regards. > > Marcos. > > On Tue, Oct 25, 2011 at 3:35 PM, [email protected] > <[email protected]>wrote: > > > > > > > > > Great news, thank you T. Delenikas! > > > The only thing I'm worried about is that the AirLink Fastrack Xtend > > EDGE FXT009 / FXT002 modem is A) difficult to find for sale here in > > the U.S. and B) looks to be RS232 (serial) based, no? > > > I am looking to use a USB modem for my project, something along the > > lines of the Option USB ICON Series(http://www.option.com/en/products/ > > products/mobile-devices-solutions/) or the Sierra Wireless AirCard's > > (http://www.sierrawireless.com/productsandservices/AirCard/ > > USBModems.aspx). > > > Are any of those USB Modems supported in SMSLib? > > > I was also looking into the ZTE MF636 as it is on the current list of > > supported modems, but again that is difficult to find in the U.S. > > unlocked (not through a carrier like ATT). As well as ZTE does not > > have very good support for U.S. based customers. > > > Thanks in adv. > > > --Matt > > > On Oct 24, 12:39 pm, "T.Delenikas" <[email protected]> wrote: > > > The AT Handler contributes by Marcos is already added in the official > > repo: > > >http://code.google.com/p/smslib/source/detail?r=2313http://smslib.goo.... > > .. > > > > It's not a matter of "official" release. If Marcos says it works, you > > should > > > probably believe him :) > > > The new handler will be included on the next release. > > > -- > > You received this message because you are subscribed to the Google Groups > > "SMSLib Discussion Group" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/smslib?hl=en. -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/smslib?hl=en.
