Let me get this straight. You bought the plane used from someone else and It's my 
fault that you crashed?

Albert Wedworth wrote:

> Hi Keith
> Al
> I done just that!  Guessed at the Cof G and CRASH!!!!
> Don't do it!   Cost me the plane used $750.00 + $450.00 replacement parts.
> At lest get the C of G ! The rest you can fake.  I like the max throws on
> every thing.  But that's my style.
> And be careful with the C of G you get for the list.  When I asked, I
> received four or more different locations. The one I picked was wrong  = ; {
> Get a hold of the manufacture or someone you can trust.
> Forget Sal you'll get FRUSTRATED!!!!!
> Merry Christmas.
> Good luck.
> Al
> ----- Original Message -----
> From: "Watson, Keith" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, December 22, 2001 1:06 PM
> Subject: RE: Re: [RCSE] NSP not including plans for their kits.
>
> > > I've flown 2m and HLG.  And after 20 years of flying the same couple
> > > of planes ;-) I'm expanding out.  I just got my first high dollar 3m
> > > mouldie.  It was used and didn't have any "instructions".  My only
> > > desire for help was, at least give me a frickin' starting place for
> > > the CG so I don't immediately crash the thing!  I'll adjust from there
> > > to my own tastes.
> >
> > Here I am replying to my own post. :-)
> >
> > Why would this be such a concern if all of the existing equipment
> > locations worked successfully?  Because it is an electric.  There is
> > nothing to indicate where the previous owner had positioned the motor
> > battery.  So it is possible to place a 2lb lump of battery anywhere
> > in a 6 inch range inside the fuselage.  So "give me a starting CG" is
> > something I want! =8-O
> >
> > Even on a new pure glider I would like to know what CG will get me
> > safely off the ground for the first launch.
> >
> > Keith Watson
> >
> > PS: There is a break in our Oregon rain so it's time to go fly
> > something.! :-)
> > RCSE-List facilities provided by Model Airplane News.  Send "subscribe"
> and "unsubscribe" requests to [EMAIL PROTECTED]
>
> RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
>"unsubscribe" requests to [EMAIL PROTECTED]

--
Sal DeFrancesco
Northeast Sailplane Products
948 Hercules Dr. Suite 12
Colchester, Vt. 05446
802-655-7700

Website: http://www.nesail.com



RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to