I'm using silver bearing solder 96%tin/ 4% silver to solder 3/64" steel wire
and a propane torch. The solder rolls off even after using flux. Any
suggestions?
Thanks,
Mickey
Mickey,
did you clean the wire with steel wool or sand paper.
And the wire is probably not hot enough.
Don't waste your money on the 4% silver stuff. It is not good enough.
Just enough for them to advertise THERE IS silver in it.
Brian
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
