Tom,
If you just put in new brushes, they will have to seat in before you get
full power/contact with the commutator. And did you clean up the
commutator, scrap between the copper plates?
Jerry Miller, SOSS
Medford, OR
From: Tom Gist <[EMAIL PROTECTED]>
To: Barry Andersen <[EMAIL PROTECTED]>
CC: RCSE <[email protected]>
Subject: Re: [RCSE] Anyone have a set of Real Balls for sale?
Date: Wed, 31 Aug 2005 20:48:17 -0400
Bary,
Thanks for the input. I'm still trying to get my winch set up properly. I
put the needle bearing in, but something else must have gotten misaligned,
as it was actually worse. I reset all the brushes, and will try again this
weekend. It spins up fairly well with no load (and no line on the drum).
I may have to replace the solenoids, as well. I think I may be getting too
much contact resistance.
Anyway, once I have something definite to say, it will be up on RCSE.
Thanks,
Tom
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that
subscribe and unsubscribe messages must be sent in text only format with
MIME turned off. Email sent from web based email such as Hotmail and AOL
are generally NOT in text format
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe
messages must be sent in text only format with MIME turned off. Email sent from web based email
such as Hotmail and AOL are generally NOT in text format
