The problem with doing it this way is that
if you're somewhere in the middle, Windows can switch between AP's a
LOT, which can get really annoying, especially on a system running DHCP.
--Rick
On 3/2/06,
Rick Dobbs <[EMAIL PROTECTED]> wrote:
The problem with doing it this way is that if you're somewhere in the middle, Windows can switch between AP's a LOT, which can get really annoying, especially on a system running DHCP.
--RickOn 3/2/06, Mike Burgess <[EMAIL PROTECTED]> wrote:
--- Jim Thompson <[EMAIL PROTECTED]> wrote:
>
> Mike Burgess wrote:
>
> >Clone them (ssid & key), and then change the radio
> ch
> >of 1 only. Laptop should seek the best signal. my
> .02
> >worth
> >
> >
> leave them on the same channel and you'll get better
> results.
So the "seek connection" is slower than the multipath
zone is wide ? I figure there would be a glitch, for
a sec or so, but I did not think that 2 transmitters
on the same FQ would work well at all.
I've never done it, but that was my kneejerk guess.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "SOCALWUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/SOCALWUG
SOCALWUG website: http://www.socalwug.org
-~----------~----~----~----~------~----~------~--~---
