You do realize that channel 2 overlaps channel 1 and channel 10 overlaps channel 11 right?
As you can see from the chart below, an AP on channel 2 is going to be getting interference from all neighboring APs on channels 1 through 5. Channel Lower Frequency Central Frequency Upper Frequency 1 2.401 2.412 2.423 2 2.404 2.417 2.428 3 2.411 2.422 2.433 4 2.416 2.427 2.438 5 2.421 2.432 2.443 6 2.426 2.437 2.448 7 2.431 2.442 2.453 8 2.436 2.447 2.458 9 2.441 2.452 2.463 10 2.446 2.457 2.468 11 2.451 2.462 2.473 Pulled from: http://www.qsl.net/n9zia/dsss-channels.html -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Burgess Sent: Thursday, January 03, 2008 11:50 AM To: [email protected] Subject: [SOCALWUG] Re: Apple AP Extreme Weirdness --- Jason Fields <[EMAIL PROTECTED]> wrote: > Richard, > > I thhink it was actually the fact that it was sharing the same channel/ > spectrum as four other base units.. and re-flashing the firmware > probably didnt hurt things... ;-) But WHICH base station got it's firmware flashed ??? And who's setting stuff up, and leaveing it on the default channels. Come on, I always set stuff on 2 or 10, never anybody else there, less problems. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "SOCALWUG" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/SOCALWUG SOCALWUG website: http://www.socalwug.org -~----------~----~----~----~------~----~------~--~---
