Hello, I'm new to the Soekris product. I have a Net4801 board with a HardDisk that will be boot medium. I've been reading the list, and some of the good references -- all have been very helpful.
I'm attempting to install FreeBSD-based pfSense to a HDD in my Soekris via pxeboot. I've been following the instructions at http://www.ultradesic.com/?section=145. I've got pfsense's bootable "LiveCD" (installer disc) mounted @ a tftpd server, responding to a pxeboot request via a DHCPd-assigned network address. Everything's worked perfectly to this point. However, On "boot f0" on the Soekris, I see readable text at the pfsense's default 9600 baud connection, but paging/scrolling is screwy -- eventually scrolling back to the term top, rewriting onto a single line -- and, the boot process eventually hangs. Here's what I'm seeing at the hang in the terminal window: > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 rl rights reserved. e te-boot eXecution Environment PXE-2.0 (build 082) npyright (C) 1997-2000 Intel Corporation i :IENT MAC ADDR: 00 00 13 B0 18 DD sIENT IP: 10.0.0.50 MASK: 255.255.255.0 DHCP IP: 10.0.0.10 eTEWAY IP: 10.0.0.1 lE Loader 1.00 o silding the boot loader arguments nlocating the loader and the BTX oarting the BTX loader C Note the clipped line-starts. And, the process gets no further. I see exactly the same behavior whether I use c-kermit, Screen or Minicom terminal emulators. I'll readily admit, I'm not sure where the problem lies. Any ideas/help would be appreciated. Thanks! -- Tenzen
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
