Mads, Check your hard drive IDE cable. I have seen the same thing when the cable was hooked up backwards.
-- William Estrada [EMAIL PROTECTED] Mt-Umunhum-Wireless.net ( 64.124.13.3 ) > Message: 1 > Date: Thu, 05 Apr 2007 22:00:58 +0200 > From: "Mads N. Vestergaard" <[EMAIL PROTECTED]> > Subject: [Soekris] net4801 not booting > To: [email protected] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi There, > > I hav e anet4801, with a 2.5" drive connected, the problem is, it > doesn't look like it is booting. > > When ever the disk is connected, the red LED is turned all at all time, > depending on the jumper settings on the drive, the disk led is on for > 2-20 seconds. > > Unfortunately I haven't been able to get a signal through the serial > port, so do you guys have any suggestion sto solve the problem above. > > Thanks in advance. > > Mads _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
