Hi, i've little problem with net4801 and network speed. With iperf, max speed is 30bmps.
PC1 (10.1.1.251) <-> eth1 (10.1.1.254) <-> eth0 (192.168.0.99) <-> PC2 (192.168.0.51) network is 100Mbps full iperf from PC1 client to PC2 server : sudo iperf -c 192.168.0.51 -i 3 ------------------------------------------------------------ Client connecting to 192.168.0.51, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 10.1.1.251 port 56225 connected with 192.168.0.51 port 5001 [ 3] 0.0- 3.0 sec 10.4 MBytes 29.0 Mbits/sec [ 3] 3.0- 6.0 sec 10.4 MBytes 29.0 Mbits/sec [ 3] 6.0- 9.0 sec 10.4 MBytes 29.0 Mbits/sec [ 3] 0.0-10.0 sec 34.6 MBytes 29.0 Mbits/sec I've bering-uclinux 3.0.2 on CF with shorewall for routing Is it possible to increase network speed because 30 Mbps is very small :( Perhaps with sysctl ? All feedbacks are welcome Regards Franck -- http://www.linuxpourtous.com _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
