On 10 Jul 2007, at 14:34, Franck wrote: > i've little problem with net4801 and network speed. With iperf, max > speed > is 30bmps. > > sudo iperf -c 192.168.0.51 -i 3 > ------------------------------------------------------------ > [ 3] local 10.1.1.251 port 56225 connected with 192.168.0.51 port > 5001 > [ 3] 0.0- 3.0 sec 10.4 MBytes 29.0 Mbits/sec > [ 3] 3.0- 6.0 sec 10.4 MBytes 29.0 Mbits/sec > [ 3] 6.0- 9.0 sec 10.4 MBytes 29.0 Mbits/sec > [ 3] 0.0-10.0 sec 34.6 MBytes 29.0 Mbits/sec > > I've bering-uclinux 3.0.2 on CF with shorewall for routing > > Is it possible to increase network speed because 30 Mbps is very > small :( > Perhaps with sysctl ?
Just did a quick test. I get identical results (29.4 Mbits/sec) under FreeBSD 6.2 (with pfSense). But still plenty quick enough for my ADSL, and of course it is a lower-power processor. The net5501 is faster: an earlier post to this list reported that the 5501 could fill 100 Mbit Ethernet. Cheers, - Martin. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
