Hi, > > On 10 Jul 2007, at 14:34, Franck wrote: > >> i've little problem with net4801 and network speed. With iperf, max >> speed >> is 30bmps. >> >> sudo iperf -c 192.168.0.51 -i 3 >> ------------------------------------------------------------ >> [ 3] local 10.1.1.251 port 56225 connected with 192.168.0.51 port >> 5001 >> [ 3] 0.0- 3.0 sec 10.4 MBytes 29.0 Mbits/sec >> [ 3] 3.0- 6.0 sec 10.4 MBytes 29.0 Mbits/sec >> [ 3] 6.0- 9.0 sec 10.4 MBytes 29.0 Mbits/sec >> [ 3] 0.0-10.0 sec 34.6 MBytes 29.0 Mbits/sec >> >> I've bering-uclinux 3.0.2 on CF with shorewall for routing >> >> Is it possible to increase network speed because 30 Mbps is very >> small :( >> Perhaps with sysctl ? > > Just did a quick test. I get identical results (29.4 Mbits/sec)
Ok, thanks for the bench > under FreeBSD 6.2 (with pfSense). But still plenty quick enough for > my ADSL, and of course it is a lower-power processor. Yes, but for me, it's not ADSL. It's in a datacenter :( > The net5501 is faster: an earlier post to this list reported that the > 5501 could fill 100 Mbit Ethernet. Hummm, good news :) Regards Franck -- http://www.linuxpourtous.com _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
