In message <[EMAIL PROTECTED]>, Jochen Grotepass writes: > The "hang on boot" issue has meanwhile identified by Soeren and the > information on how to fix it can be read here > http://www.soekris.com/Issue0005.htm > > I have tested it - now I miss my Disk LED - but booting after power-off > is gone.
Hi Jochen. Thanks for the reference! I should read more frequently the list of known issues. ;-) I think that I will return the board instead of resoldering the pads on the capacitor myself. I suppose that it will be better returning it to Cortex Systems, as I am European citizen. Don't know however if I should contact Cortex Systems only if I get the board from them and with Soekris Engineering in any other case. My experience soldering surface mount components is not good at all. I only soldered a capacitor on the board of the HDD on a HP 9000; after expending a saturday on the physics laboratory learning how soldering surface mount components I tried to solder that capacitor. The disk worked only for ten months. I prefer this problem being fixed by someone that has more knowledge on soldering. Cheers, Igor. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
