You can return the board to Cortex Systems regardless of where it's bought :)
On Dec 12, 2007 4:14 PM, Igor Sobrado <[EMAIL PROTECTED]> wrote: > In message <[EMAIL PROTECTED]>, Jochen Grotepass writes: > > The "hang on boot" issue has meanwhile identified by Soeren and the > > information on how to fix it can be read here > > http://www.soekris.com/Issue0005.htm > > > > I have tested it - now I miss my Disk LED - but booting after power-off > > is gone. > > Hi Jochen. > > Thanks for the reference! I should read more frequently the list > of known issues. ;-) > > I think that I will return the board instead of resoldering the pads > on the capacitor myself. I suppose that it will be better returning it > to Cortex Systems, as I am European citizen. Don't know however if > I should contact Cortex Systems only if I get the board from them and > with Soekris Engineering in any other case. > > My experience soldering surface mount components is not good at all. > I only soldered a capacitor on the board of the HDD on a HP 9000; > after expending a saturday on the physics laboratory learning how > soldering surface mount components I tried to solder that capacitor. > The disk worked only for ten months. > > I prefer this problem being fixed by someone that has more knowledge > on soldering. > > > Cheers, > Igor. > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- Kind regards René Luckow _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
