Hi Thanks for the suggestion - I tried it and the flash turned up as "Pri Sla" but the HD remained unseeable both by the BIOS and OpenBSD. Does anyone know if the BIOS can't see a drive then does it set the hardware in such a way that OpenBSD can't see it either or is drive detection done independantly by both?
I have also tried removing the CF. Still no HD. I have also tried downgrading to BIOS 1.32i just in case it helped but it didn't (now back to 1.33) So... any further clues - where do I go from here? I don't have a spare SATA HD to try through I may be able to scrounge one, nor do I have a spare PATA drive - though likewise I might be able to scrounge one in a bit. Ta JC >Hi John, > >Try to set the flash card as secondary then reboot : > >set flash=secondary > >Cheers, > >John Cox a écrit : >> Hi >> >> Just received my 5501-70. It comes with BIOS 1.33 and (unlike many >> others on this list) has no problems at all seeing and booting off the >> 8G Sandisk Extreme III CF card I fitted. However it refuses point-blank >> to see the WD 320G SATA HD I fitted. It doesn't appear on the device >> listing at the beginning and is marked "ignored (disabled)" when OpenBSD >> has a go. I mangled the supplied SATA lead when removing it from the >> mounting kit so I'm using a random SATA lead that I had lying around. I >> can see the drive and it appears to work if I plug the SATA lead into my >> PC (leaving it powered by the 5501) so its not the power, lead or the >> drive. Is there something you have to set to get the 5501 to look at >> the SATA? (I want it to boot from the CF like it does at the moment but >> to have the HD for bulk storage.) >> >> Any clues? I enclose a boot log in case it helps. >> >> Thanks >> >> John Cox >> >> >> Drive is a Western Digital 320GB Scorpio 5400RPM S150 8MB 2.5" >> mfr#: WD3200BEVT >> >> Boot log (some control chars removed): >> >> >> POST: 012345689bcefghips1234ajklnopqr,,,tvwxy >> >> comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris >> Engineering. >> >> net5501 >> >> CPU Geode LX 500 Mhz >> 0000 Mbyte Memory >> 0512 >> >> Pri Mas SanDisk SDCFX3-8192 LBA Xlt 996-255-63 8003 Mbyte >> >> Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int >> ------------------------------------------------------------------- >> 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 >> 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 >> 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 >> 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 >> 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 >> 0:14:0 8086 1074 02000005 0117 8230 08 40 00 A0020000 A0140000 10 >> 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 >> 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 >> 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A01E0000 00000000 15 >> 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A01E1000 00000000 15 >> >> Seconds to automatic boot. Press Ctrl-P for entering Monitor. >> Using drive 0, partition 3. >> Loading... >> probing: pc0 com0 com1 pci mem[639K 511M a20=on] >> >> disk: hd0+ >> >> >>>> OpenBSD/i386 BOOT 3.01 >>>> >> >> com0: 9600 baud >> >> switching console to com0 >> >> >>>> OpenBSD/i386 BOOT 3.01 >>>> >> >> boot> >> >> booting hd0a:/bsd: 5913424|[52+306864+287943]=0x72a4d4 >> >> entry point at 0x200120ªÿ >> >> [ using 595232 bytes of bsd ELF symbol table ] >> >> Copyright (c) 1982, 1986, 1989, 1991, 1993 >> >> The Regents of the University of California. All rights >> reserved. >> >> Copyright (c) 1995-2008 OpenBSD. All rights reserved. >> http://www.OpenBSD.org >> >> >> OpenBSD 4.3 (GENERIC) #696: Thu Mar 6 05:09:01 MST 2008 >> >> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC >> >> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" >> 586-class) 500 MHz >> >> cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX >> >> real mem = 536440832 (511MB) >> >> avail mem = 510664704 (487MB) >> >> mainbus0 at root >> >> bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40 >> >> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 >> >> pcibios0: pcibios_get_intr_routing - function not supported >> >> pcibios0: PCI IRQ Routing information unavailable. >> >> pcibios0: PCI bus #0 is the last bus >> >> bios0: ROM list: 0xc8000/0xa800 >> >> cpu0 at mainbus0 >> >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> >> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 >> >> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES >> >> vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, >> address 00:00:24:c9:a7:30 >> >> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI >> 0x004063, model 0x0034 >> >> vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, >> address 00:00:24:c9:a7:31 >> >> ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI >> 0x004063, model 0x0034 >> >> vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, >> address 00:00:24:c9:a7:32 >> >> ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI >> 0x004063, model 0x0034 >> >> vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, >> address 00:00:24:c9:a7:33 >> >> ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI >> 0x004063, model 0x0034 >> >> vendor "Intel", unknown product 0x1074 (class network subclass ethernet, >> rev 0x05) at pci0 dev 14 function 0 not configured >> >> glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, >> 32-bit 3579545Hz timer, watchdog, gpio >> >> gpio0 at glxpcib0: 32 pins >> >> pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, >> channel 0 wired to compatibility, channel 1 wired to compatibility >> >> wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFX3-8192> >> >> wd0: 4-sector PIO, LBA, 7815MB, 16007040 sectors >> >> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 >> >> pciide0: channel 1 ignored (disabled) >> >> ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, >> version 1.0, legacy support >> >> ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15 >> >> usb0 at ehci0: USB revision 2.0 >> >> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >> >> isa0 at glxpcib0 >> >> isadma0 at isa0 >> >> pckbc0 at isa0 port 0x60/5 >> >> pckbd0 at pckbc0 (kbd slot) >> >> pckbc0: using irq 1 for kbd slot >> >> wskbd0 at pckbd0: console keyboard >> >> pcppi0 at isa0 port 0x61 >> >> midi0 at pcppi0: <PC speaker> >> >> spkr0 at pcppi0 >> >> nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 10: GPIO VLM TMS >> >> gpio1 at nsclpcsio0: 29 pins >> >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> >> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> >> pccom0: console >> >> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo >> >> usb1 at ohci0: USB revision 1.0 >> >> uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >> >> biomask e5c5 netmask ffe5 ttymask ffe7 >> >> mtrr: K6-family MTRR support (2 registers) >> >> softraid0 at root >> >> root on wd0a swap on wd0b dump on wd0b >> >> Automatic boot in progress: starting file system checks. >> /dev/rwd0a: file system is clean; not checking >> /dev/rwd0h: file system is clean; not checking >> /dev/rwd0d: file system is clean; not checking >> /dev/rwd0g: file system is clean; not checking >> /dev/rwd0e: file system is clean; not checking >> setting tty flags >> starting network >> DHCPREQUEST on vr0 to 255.255.255.255 port 67 >> DHCPACK from 10.44.0.2 >> bound to 10.44.1.9 -- renewal in 21600 seconds. >> starting system logger >> starting initial daemons:. >> savecore: /dev/wd0b: Device not configured >> checking quotas: done. >> building ps databases: kvm dev. >> clearing /tmp >> starting pre-securelevel daemons:. >> setting kernel security level: kern.securelevel: 0 -> 1 >> creating runtime link editor directory cache. >> preserving editor files >> starting network daemons: sendmail inetd sshd. >> starting local daemons:. >> standard daemons: cron. >> Tue Aug 28 21:44:35 BST 2007 >> >> OpenBSD/i386 (yidhra.outer.uphall.net) (tty00) >> >> login: 00 >> _______________________________________________ >> Soekris-tech mailing list >> [email protected] >> http://lists.soekris.com/mailman/listinfo/soekris-tech >> _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
