Hi list, I'm trying to PXE boot a 4801 with 1.33 BIOS. It boots up alright, DHCP and TFTP work, but then the console output is crippled to a 1x15 character line. How can I change this? Here's what it looks like:
----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082) Copyright (C) 1997-2000 Intel Corporation CLIENT MAC ADDR: 00 00 24 C2 3F E0 CLIENT IP: 192.168.1.9 MASK: 255.255.255.0 DHCP IP: 192.168.1.36 GATEWAY IP: 192.168.1.1 memtestux.cfg/d ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- The very last line: memtestux.cfg/d ^^^^^^^^^^^^^^^^ Is where all output (boot.txt and so on) appears. I know that it's getting the correct output as I have logged the minicom transfer and that looks fine. Only output is scrambled. Any ideas? Regards, Johannes _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
