Hi everyone, I dug out this old thread from the mailing list since I am now affected by the same bug. Has anyone found anything new regarding this.
The same problem occur on both a 4501 and a 5501 Thanks in advance, Thomas Albech On Mon, 2008-08-25 at 00:12 +0200, Johannes Bauer wrote: > Hi list, > > I'm trying to PXE boot a 4801 with 1.33 BIOS. It boots up alright, DHCP > and TFTP work, but then the console output is crippled to a 1x15 > character line. How can I change this? Here's what it looks like: > > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > > boot f0 > > NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 > > Copyright (C) 2002, 2003 National Semiconductor Corporation > All rights reserved. > > Pre-boot eXecution Environment PXE-2.0 (build 082) > Copyright (C) 1997-2000 Intel Corporation > > > CLIENT MAC ADDR: 00 00 24 C2 3F E0 > CLIENT IP: 192.168.1.9 MASK: 255.255.255.0 DHCP IP: 192.168.1.36 > > GATEWAY IP: 192.168.1.1 > memtestux.cfg/d > > ----8<--------8<--------8<--------8<--------8<--------8<--------8<---- > > The very last line: > memtestux.cfg/d > ^^^^^^^^^^^^^^^^ > > Is where all output (boot.txt and so on) appears. I know that it's > getting the correct output as I have logged the minicom transfer and > that looks fine. Only output is scrambled. > > Any ideas? > > Regards, > Johannes > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
