Hi,
I just receive on dec 2nd, my new "very expensive box" net5501-70 from 
soekris USA.
I boot the net5501 with a 4 Go CF card and voyage-linux 0.5.2 OS 
installed in.
My computer based on linux Ubuntu 8.04.1.is linked to the net5501.
BIOS v 133

The OS is  working good  and I made some tests in order to use it as a 
router.
But it's impossible to communicate with eth1 eth2 eth3.  eth0 is well 
working.


-------------------------------------------------------------------
 >> first test : work well
[ home PC]   ---- eth0 [ net5501]
192.168.10.1       192.168.10.50

soekris:/etc# ping -I eth0 192.168.10.1
PING 192.168.10.1 (192.168.10.1) from 192.168.10.50 eth0: 56(84) bytes 
of data.
64 bytes from 192.168.10.1: icmp_seq=1 ttl=64 time=0.250 ms
64 bytes from 192.168.10.1: icmp_seq=2 ttl=64 time=0.174 ms

[EMAIL PROTECTED]:~$ ping 192.168.10.50
PING 192.168.10.50 (192.168.10.50) 56(84) bytes of data.
64 bytes from 192.168.10.50: icmp_seq=1 ttl=64 time=0.242 ms
64 bytes from 192.168.10.50: icmp_seq=2 ttl=64 time=0.238 ms
64 bytes from 192.168.10.50: icmp_seq=3 ttl=64 time=0.238 ms
 >>>>>>>>>>>>>>>>>>>> OK good

-------------------------------------------------------------------
 >> second test :
[ home PC]   ---- eth1 [ net5501]
192.168.10.1       192.168.10.51

soekris:/etc# ping -I eth1 192.168.10.1
PING 192.168.10.1 (192.168.10.1) from 192.168.10.50 eth1: 56(84) bytes 
of data.
 From 192.168.10.50 icmp_seq=2 Destination Host Unreachable
 From 192.168.10.50 icmp_seq=3 Destination Host Unreachable
 >>>>>>>>>>>>>>>  no ping answer  from the box net5501 !!!

[EMAIL PROTECTED]:~$ ping 192.168.10.51
PING 192.168.10.51 (192.168.10.51) 56(84) bytes of data.
 From 192.168.10.1 icmp_seq=2 Destination Host Unreachable
 From 192.168.10.1 icmp_seq=3 Destination Host Unreachable
 >>>>>>>>>>>>>>>  no ping answer  from my PC !!!

soekris:/etc# ping 192.168.10.51
PING 192.168.10.51 (192.168.10.51) 56(84) bytes of data.
64 bytes from 192.168.10.51: icmp_seq=1 ttl=64 time=0.191 ms
64 bytes from 192.168.10.51: icmp_seq=2 ttl=64 time=0.143 ms
 >>>>>>>>>>>>>>>  only loopback ping on net5501 working

 >> third test : >>>>>>>>>>>>>>>>>>>>> no ping answer !!!
[ home PC] ---- eth2 [ net5501]   ....   and same for eth3

-------------------------------------------------------------------
here are some tests result on my soekris

soekris:/# netstat -i -e
Kernel Interface table
eth0      Link encap:Ethernet  HWaddr 00:00:24:CB:51:EC
           inet addr:192.168.10.50  Bcast:192.168.10.255  Mask:255.255.255.0
           inet6 addr: fe80::200:24ff:fecb:51ec/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:29788 errors:0 dropped:0 overruns:0 frame:0
           TX packets:3404 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:7980048 (7.6 MiB)  TX bytes:257892 (251.8 KiB)
           Interrupt:11

eth1      Link encap:Ethernet  HWaddr 00:00:24:CB:51:ED
           inet addr:192.168.10.51  Bcast:192.168.10.255  Mask:255.255.255.0
           inet6 addr: fe80::200:24ff:fecb:51ed/64 Scope:Link
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:2590 errors:0 dropped:0 overruns:0 frame:0
           TX packets:468 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:171058 (167.0 KiB)  TX bytes:44456 (43.4 KiB)
           Interrupt:5 Base address:0x2100

eth2      Link encap:Ethernet  HWaddr 00:00:24:CB:51:EE
           inet addr:192.168.10.52  Bcast:192.168.10.255  Mask:255.255.255.0
           inet6 addr: fe80::200:24ff:fecb:51ee/64 Scope:Link
           UP BROADCAST MULTICAST  MTU:1500  Metric:1
           RX packets:4 errors:0 dropped:0 overruns:0 frame:0
           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:362 (362.0 b)  TX bytes:468 (468.0 b)
           Interrupt:9 Base address:0x6200

eth3      Link encap:Ethernet  HWaddr 00:00:24:CB:51:EF
           inet addr:192.168.10.53  Bcast:192.168.10.255  Mask:255.255.255.0
           UP BROADCAST MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
           Interrupt:12 Base address:0x8300

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           inet6 addr: ::1/128 Scope:Host
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:46560 errors:0 dropped:0 overruns:0 frame:0
           TX packets:46560 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:5214270 (4.9 MiB)  TX bytes:5214270 (4.9 MiB)

soekris:/etc# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth1
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth2
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth3
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.10.9    0.0.0.0         UG    0      0        0 eth0


dmesg result :
...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xa0004000, 
00:00:24:cb:51:ec, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
eth1: VIA Rhine III (Management Adapter) at 0xa0004100, 
00:00:24:cb:51:ed, IRQ 5.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth2: VIA Rhine III (Management Adapter) at 0xa0004200, 
00:00:24:cb:51:ee, IRQ 9.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth3: VIA Rhine III (Management Adapter) at 0xa0004300, 
00:00:24:cb:51:ef, IRQ 12.
eth3: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
...


soekris:/etc# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

-------------------------------------------------------------------

I try several ethernet cables for the second test but still impossible 
to communicate by eth1 eth2 eth3.
No problems found in : iptables, route, dmesg, ifconfig.
Where is the bug ?

Only eth0 is perfectly working. So perfectly thah I had upgraded the OS
with apt-get command when linked to Internet by eth0, no link problem.

Would you help me in configuring eth1 2 3,
I think it's a material problem !!! but not really sure ...

Thanks
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to