Hello, I have the following issue with a net4801-60 : i cannot succeed in seing both CF and hd at boot - CF is a Sandisk Ultra II 4 Gb - HD is either Samsung Spinpoint HM080GC or MMPO402H or Seagate Momentus 5400.3 160 Gb (hit the 134 Gb limit) and jumpered in CS mode - I tried ComBios versions 1.29 (default), 130 and 1.33
If Flash set to secondary : ComBios only displays the HD If Flash set to primary : ComBios only displays the CF If disk jumpered to master and no CF => ComBios only displays the HD twice In all cases no disks are detected at all during the subsequent PXE debian installation I had no problem with this board running OpenBSD for more than a year Same issue with a newer net4801-50 Am I missing something ? Thanks for your help Sebastien _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
