I've put 2.5" 80 gig SATA into Soekris 5501 cases. Gotta be careful with the cables and stuff so you don't whack a mainboard capacitor, but it works fine.
On Sun, Feb 21, 2010 at 5:21 PM, Poul-Henning Kamp <[email protected]>wrote: > In message <[email protected]>, Henrik /KaarPoSoft writes: > > >However, the specs say that it has form-factor 2.5" x 1/6H. > >Will it fit in the net5501 standard case with the 2.5" HDD mounting kit? > > I don't think so, it's really pretty tight in there. > > But if you do not need the PCI expansion slot, you could simply bolt > the disk down over on that side of the cabinet by drilling four > holes in the bottom of the cabinet. > > Or, for more "interrim" installation: a couple of shots with the > glue-gun or a wad of double-stick tape... > > -- > Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 > [email protected] | TCP/IP since RFC 956 > FreeBSD committer | BSD since 4.3-tahoe > Never attribute to malice what can adequately be explained by incompetence. > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- mailto:[email protected] // GoogleTalk: [email protected] GV: 202-642-1717
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
