Henrik /KaarPoSoft wrote: >>> However, the specs say that it has form-factor 2.5" x 1/6H. >>> Will it fit in the net5501 standard case with the 2.5" HDD mounting kit? >>> >> I don't think so, it's really pretty tight in there. >> >> But if you do not need the PCI expansion slot, you could simply bolt >> the disk down over on that side of the cabinet by drilling four >> holes in the bottom of the cabinet. >> >> Or, for more "interrim" installation: a couple of shots with the >> glue-gun or a wad of double-stick tape... >> >> > Sounds like a good solution (bolting it on the PCI side of the cabinet, > that is; not the double-stick tape :-)) > > I guess I should just go ahead and order the thing, and see if I can get > it to work...
If your going to hack the case, I recommend attaching the disks to the outside instead of putting all the heat on the inside. I have 2 RAID disks on the outside and a PCI SATA card. I also use http://www.startech.com/item/SATABAY425BK-4-Drive-25in-Removable-Mobile-Rack-SAS-SATA-Backplane.aspx -- Sean McGrath [email protected] _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
