On 06/11/2010 06:52 PM, Alan wrote: > Ok, I did this test: > > I disconnected all the TDM modules except for one FXO, I disconnected > the power cable going to the TDM, I used a 12 Volts, 6.6 Amps PSU, > added the heatsinks, and the soekris is still hanging! > Now I'm testing again with a 12 Volts, 8.5 Amp PSU, but at this point > I don't think its a power issue. > > If I remove the TDM card everything works well, but the purpose of > this box is to make it a PBX. Maybe the TDM card is just not > compatible with the soekris? > > Any suggestions? > > Alan
Alan, I can assure you that the card has no problems working with a net5501. I've also used 8 and 24 port versions of the card (and similar cards by Rhino Equipment) without issue. Perhaps you have a defective card? -- Darrick Hartman DJH Solutions, LLC http://www.djhsolutions.com _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
