Hello,

Sorry if this is a double post : I had first posted this as a non-member, and I 
still can't see it in the archives, and no answer either, so I try again, with 
updates...

I have a Net5501, with a 8 Gb CompactFlash bought from soekris (Sandisk Ultra 
II) a while ago.

This box was primarily a Debian squeeze, then upgraded to Wheezy.

Yesterday I upgraded it to Jessie, all went fine, then I rebooted... and it 
never started again.

I've plugged in the console cable, and it seems that as soon as it starts 
reading from the CF, it hangs : 

comBIOS ver. 1.33c 20080626  Copyright (C) 2000-2008 Soekris Engineering.

net5501

0512 Mbyte Memory                        CPU Geode LX 500 Mhz 

Pri Mas  SanDisk SDCFH2-8192             LBA Xlt 996-255-63  8003 Mbyte

Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int 
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 
0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15
0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15

 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.

(then nothing happens)
Power and Disk LEDS are ON

- I tried a brand new sandisk CF, exactly the same behaviour.
- I PXE-booted a live distrib, tried to repair grub (with no error), but it 
still does not boot

Any idea ?

> show

ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 2
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 81 F0 FF 
ShowPCI = Enabled
Reset = Hard
CpuSpeed = Default


(I had a second problem with displaying the console, it's now solved.)

Thanks for your help
Nicolas
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech

Reply via email to