OMFG : you're right !!
It actually booted, but as it didn't get the same IP, I did not know
that.
For those reading this in the future (including myself probably...)
To enable the console, I've added in /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=ttyS0,19200n8"
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --speed=19200 --unit=0 --word=8 --parity=no
--stop=1"
(Maybe not all necessary, but it works with this...)
Then run "update-grub"
Thanks everyone
Nicolas
Le 2015-09-07 19:05, Jan Ceuleers a écrit :
On 07/09/15 14:01, Nicolas wrote:
Did anyone sucessfully run a Jessie on Net5501 ?
Yes, I'm running Jessie on my net5501:
root@skr03:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.2 (jessie)
Release: 8.2
Codename: jessie
root@skr03:~# uname -a
Linux skr03 3.16.0-4-586 #1 Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)
i586 GNU/Linux
root@skr03:~# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
stepping : 2
microcode : 0x8b
cpu MHz : 499.890
cache size : 128 KB
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de pse tsc msr cx8 sep pge cmov clflush mmx mmxext
3dnowext
3dnow vmmcall
bogomips : 999.78
clflush size : 32
cache_alignment : 32
address sizes : 32 bits physical, 32 bits virtual
power management:
Something else just occurred to me: perhaps the box is actually
working,
but you only think that it isn't. Specifically:
- Make sure that you've set the serial console up correctly.
Meaning that once the kernel is booted it uses the serial port as its
console (in my case this means console=ttyS0,9600n8 on the kernel
command line).
- Set up the serial console in grub
- Make sure that there's a getty attached to the serial port
- I forget the particulars, but I remember having trouble with the
boot
process stalling due to hardware flow control on the serial port. You
can avoid this by configuring the Soekris BIOS correctly (again: I
forget the details) or by unplugging the serial port while the box
boots.
HTH, Jan
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
