I have been using SDRadio 0.99 for a few weeks using an audigy-2 with
no problems ... I finally installed an Delta-44 and when I set the
source and output to use the Delta-44, my computer would hang and the
only way to proceed was to pull the line cord from the wall and
re-insert ... If I chose the audigy as the source and the Delta-44 as
the output, it worked ... or if I set the Delta-44 as the source and
the audigy to output, it worked ... but when I set the Delta-44 to
input and output, it would hang ... SDRadio 0.095 had no problem, it
worked fine ... only SDRadio 0.99 had the problem ... I changed PCI
slots ... reinstalled the Delta-44 and SDRadio 0.99 software with no
help ... SpectrumLab worked ok ... Spectran V2 would hang (I didn't
try ARGO) ... I finally got the Delta-44 to work when I went to the
Delta-44 HardWare Settings ... to the Multi track driver device and
set the Independent radio button to ON ... ( Single and In-Synch radio
button ON was the default setting ...) ... I don't know if this is a
bug or a feature ... If it is a bug this is a heads-up alert ...
Jim KI6MZ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/soft_radio/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
