GM Alberto, Thanks for the new version which I just installed. I bumped into a glitch: This relates to the Zap button, it seems to work most of the time but here is what happened once. The lower windows (waterfall and spectrum) froze and the Zap button stayed on. Pressing the Zap button again is ineffective. I have the CW button and the CW Peak button on. I was listening to the CW contest and pressed the Zap button many times before and it worked properly. The upper windows are ok, CW is heard and I can tune. Pressing Stop and Start -> everything back to normal. It can be reproduced by clicking repetitively on the Zap button: it happens one in a while. Once in a while only the Zap button stays on, the lower windows are OK and pressing again on the Zap button brings it back to its normal state. The problem also happens when CW Peak is off. It also seems that the Zap button goes back off after a while but the lower waterfall and spectrum are still frozen.
While playing around to see what effect have this Zap problem I also discovered something broken with the filters. One of the first things I did when listening to the contest was to change the CW tone to 600Hz (601 exactly) and reduce the filter to 200 Hz. After restarting Winrad I have the following: CW filter back to 400Hz bandwidth, tone still on 601. But now LSB and USB have the 200Hz bandwidth, also centered on 601Hz. As I did not listen to SSB I do not know what was the status of LSB and USB after installation. I also noticed that the help screen says: Version 1.28 will expire on May 31, 2007 I guess it is Version 1.23 Build 28. Jean-Claude PJ2BVU
