--- In [email protected], "i2phd" <[EMAIL PROTECTED]> wrote: > ...... > What I did was the following : > - Reset Winrad to the default settings, using the button in the > Options menu. > - Choose the CW mode, and set the CW pitch to 601 Hz and the passband > to 200 Hz. > - Then I closed down Winrad with the Exit button. > _ I restarted Winrad, and pressed the Start button. CW pitch was at > 601 Hz and the passband was at 200 Hz... LSB and USB passband was at > the default value of 200 - 3800 Hz.... > > What do you obtain if you do exactly the same procedure ? >
It works for me, same result. Now the funny thing is that after doing this I can click hundred times on the Zap button without any freeze. One difference: when it happened the band was full of signals and now I did not even bother to turn on the softRock, I only have the center bump on the spectrum display. It is 1:00PM so there is not much to expect on the band, I will try again this evening. One note also: my CPU has hyperthreading. If I can reproduce the freeze I will try on another machine at that point. > > I also noticed that the help screen says: > > Version 1.28 will expire on May 31, 2007 > > > > I guess it is Version 1.23 Build 28. > > Yes, that was a typing error... I am correcting it just now. I had the idea, not very important. Jean-Claude, PJ2BVU
