Hank, it will definitely receive 530 to 1700 kHz. I use mine with Winrad, which does receive DRM.
The antenna jack is a BNC female type. However, adapters for other types, such as PL-259 to BNC male, SO-239 to BNC male (or female), etc. are readily available. The more common adapters are often stocked by the local Radio Shack store. If you have any other questions, I will do my best to answer them. --- In [email protected], "hank smith" <hanksmi...@...> wrote: > > hello > I have a soft66adh I just purchased > can you tell me if this could be used to recieve 530 to 1700 khz? > I payed 125.00 dollars > would even considder celling this one recieving am as well as drm is 2 of > the things I have been wanting to do. > can you also tell me what type of antenna jack yours takes? > Hank > ----- Original Message ----- > From: "ni9n" <peg...@...> > To: <[email protected]> > Sent: Saturday, January 23, 2010 8:08 AM > Subject: [soft_radio] Re: LD-1 in production, ready to take orders. > > > > Yes, it sure can! One of the preselector filters is actually a lowpass > > filter, so it'll probably work well even lower that 530 kHz, but it hasn't > > been tested below the "standard" AM broadcast band. I use it to listen to > > AM broadcast stations, and it works well. On the upper end, it works well > > to at least 30 MHz, probably a bit higher, but the DDS only works up to > > 37.5 MHz. > > > > Also, I'm offering it at an introductory price of $150 US for the next two > > weeks, and I am now shipping units. > > > > --- In [email protected], "hank smith" <hanksmith5@> wrote: > >> > >> can this recieve 530 to 1700 khz? > >> what freq ranges can this recieve? > >> ----- Original Message ----- > >> From: "ni9n" <pegood@> > >> To: <[email protected]> > >> Sent: Thursday, January 21, 2010 7:05 PM > >> Subject: [soft_radio] LD-1 in production, ready to take orders. > >> > >> > >> > It's taken a bit longer than I expected back in November, but I have > >> > three > >> > units just about ready to ship (waiting on backordered parts that > >> > should > >> > come tomorrow) and two more will be completed within a couple of days. > >> > When the first three are sold, I will order the parts for a second lot > >> > of > >> > five, and when those are sold ... well, you get the idea. For more > >> > details, go to www.lazydogengineering.com/LD1home.htm. To order, go to > >> > shop.lazydogengineering.com. > >> > > >> > There are several reasons for the delay. First, after reading the > >> > comments I had received back in November I realized that I really > >> > needed > >> > to develop an ExtIO dll to integrate my control software with Winrad. > >> > I > >> > had a bit of a learning curve to climb, but that is now done. I also > >> > had > >> > to develop an installer package, and I added an external mute switch > >> > option. The results are a really good software package that I intend > >> > to > >> > continue to improve. Check out the technical info, and if it looks > >> > good > >> > go ahead and place an order. I should be shipping units no later than > >> > Monday. > >> > > >> > 73, > >> > Pete, NI9N > >> > > >> > > >> > > >> > ------------------------------------ > >> > > >> > Yahoo! Groups Links > >> > > >> > > >> > > >> > > > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > >
