Hello a couple of questions my soft66adh has a sma connector what will I need to get it to a proper antenna? how do I tune with windrm? and where can I get the windrm from? thanks fore any help you can give. Hank ----- Original Message ----- From: "ni9n" <[email protected]> To: <[email protected]> Sent: Saturday, January 23, 2010 5:53 PM Subject: [soft_radio] Re: LD-1 in production, ready to take orders.
> > Hank, it will definitely receive 530 to 1700 kHz. I use mine with Winrad, > which does receive DRM. > > The antenna jack is a BNC female type. However, adapters for other types, > such as PL-259 to BNC male, SO-239 to BNC male (or female), etc. are > readily available. The more common adapters are often stocked by the > local Radio Shack store. > > If you have any other questions, I will do my best to answer them. > > --- In [email protected], "hank smith" <hanksmi...@...> wrote: >> >> hello >> I have a soft66adh I just purchased >> can you tell me if this could be used to recieve 530 to 1700 khz? >> I payed 125.00 dollars >> would even considder celling this one recieving am as well as drm is 2 of >> the things I have been wanting to do. >> can you also tell me what type of antenna jack yours takes? >> Hank >> ----- Original Message ----- >> From: "ni9n" <peg...@...> >> To: <[email protected]> >> Sent: Saturday, January 23, 2010 8:08 AM >> Subject: [soft_radio] Re: LD-1 in production, ready to take orders. >> >> >> > Yes, it sure can! One of the preselector filters is actually a lowpass >> > filter, so it'll probably work well even lower that 530 kHz, but it >> > hasn't >> > been tested below the "standard" AM broadcast band. I use it to listen >> > to >> > AM broadcast stations, and it works well. On the upper end, it works >> > well >> > to at least 30 MHz, probably a bit higher, but the DDS only works up to >> > 37.5 MHz. >> > >> > Also, I'm offering it at an introductory price of $150 US for the next >> > two >> > weeks, and I am now shipping units. >> > >> > --- In [email protected], "hank smith" <hanksmith5@> wrote: >> >> >> >> can this recieve 530 to 1700 khz? >> >> what freq ranges can this recieve? >> >> ----- Original Message ----- >> >> From: "ni9n" <pegood@> >> >> To: <[email protected]> >> >> Sent: Thursday, January 21, 2010 7:05 PM >> >> Subject: [soft_radio] LD-1 in production, ready to take orders. >> >> >> >> >> >> > It's taken a bit longer than I expected back in November, but I have >> >> > three >> >> > units just about ready to ship (waiting on backordered parts that >> >> > should >> >> > come tomorrow) and two more will be completed within a couple of >> >> > days. >> >> > When the first three are sold, I will order the parts for a second >> >> > lot >> >> > of >> >> > five, and when those are sold ... well, you get the idea. For more >> >> > details, go to www.lazydogengineering.com/LD1home.htm. To order, go >> >> > to >> >> > shop.lazydogengineering.com. >> >> > >> >> > There are several reasons for the delay. First, after reading the >> >> > comments I had received back in November I realized that I really >> >> > needed >> >> > to develop an ExtIO dll to integrate my control software with >> >> > Winrad. >> >> > I >> >> > had a bit of a learning curve to climb, but that is now done. I >> >> > also >> >> > had >> >> > to develop an installer package, and I added an external mute switch >> >> > option. The results are a really good software package that I >> >> > intend >> >> > to >> >> > continue to improve. Check out the technical info, and if it looks >> >> > good >> >> > go ahead and place an order. I should be shipping units no later >> >> > than >> >> > Monday. >> >> > >> >> > 73, >> >> > Pete, NI9N >> >> > >> >> > >> >> > >> >> > ------------------------------------ >> >> > >> >> > Yahoo! Groups Links >> >> > >> >> > >> >> > >> >> >> > >> > >> > >> > >> > ------------------------------------ >> > >> > Yahoo! Groups Links >> > >> > >> > >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
