well the QS1R and SDRMAX2 is a receiver.. so most people have not seen the need to make it into a receiver converter/control type situation..
unless you already had the QS1R, I sure hope u didnt buy it for this application a much easier/cheaper way would have been to use a 25$ softrock with a <100$ sound card and use powerSDR/IF Stage. Might also have to use icom ci-v through Hamradio Deluxe to control the icom as i don't think powerSDR/IF has code to control icom hardware. Have you just forgot about the fancy readout and, tried setting the sq1r right to 10.7 and tune the icom to 1427 to see of that works.. if that does not work you have bigger problems. When you rock the tuning the 9000 you should see stuff move on the sdr display.. w9 Ray bjarnemjelde wrote: > > > I am familiar with the QS1R but not with your kind of use. Possibly a > shot in the dark, but the QS1R will work with Winrad. More info is found > here, including download links: > http://groups.yahoo.com/group/qs1r/message/6360 > > Bjarne Mjelde > Berlevag, Arctic Norway > > --- In [email protected] <mailto:soft_radio%40yahoogroups.com>, > "Rachel" <dr.rtortol...@...> wrote: > > > > Hi, > > I'm a newbie to soft radio. I have a QS1R running off the 10.7 IF out > of the Icom 9000 receiver. I have repeatedly asked assistance trying to > get the GUI software to act like a tuning display but none of the > instructions works. So I'm hoping someone help can teach me. > > > > The QS1R has a DFE button inside which is a fequency that specifies > something and inside the display presets there are are compensations for > frequency, time, etc. Anyway I set my tuning on the 9000 to 1427 MHz and > expect to see this on the frequency display of the QS1R but I get a > number I don't recognize relates to anything. Also when a scan the > hydrogen band with HRD software nothing is intelligible on the SDRMAXIT > The good folks at Covington say I take the indicated frequency and > divide the IF frequency then multiply by the frequency offset then add > it to the dial frequency to get the correct tuned frequency. > > > > Hello? Is anybody there. That's what I don't need at all. Does > anybody know how to make the SDRMAX2 act like a receiver when it is > hooked to the IF of a receiver? > > > > Thanking you in advance. > > > > Rachel. > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/soft_radio/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/soft_radio/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
