Sorry, I understood your mail. The point I was trying to make was that
others should probably speak up, if they experience the same problem.
I understand there is nothing much you can do for me if it is a problem that
only affects me.
But if there is some bug lurking in the background, more reports would
undoubtably help.
Sorry for the confusion, I didn't intentionally wanted to misrepresent your
mail to me...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de
-----Oorspronkelijk bericht-----
From: Maurice Patel
Sent: Wednesday, December 9, 2015 9:32 PM
To: [email protected]
Subject: RE: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
Hi Leendert,
I think you misunderstood my response. My intention was not to imply that
your report carried no weight otherwise why would we have already escalated
your issue with the dev team, even before you contacted us?
My point was as you were not going through the normal support channels we
could not help you if the problem is with your setup. As I mentioned in my
email, we will keep you posted if our engineers find an issue/solution on
our end.
Maurice
Maurice Patel
Tél: 514 954-7134
Cell: 514 242-6549
From: [email protected]
[mailto:[email protected]] On Behalf Of Leendert A.
Hartog
Sent: Wednesday, December 09, 2015 3:17 PM
To: [email protected]
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
After having contacted Maurice Patel directly, I was informed this was the
first time the devs heard of this issue.
My question to you all now is, does anyone else experience this problem as
well?
I am not “on support” anymore, so my sole report doesn’t carry that much
weight...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de
From: Leendert A. Hartog<mailto:[email protected]>
Sent: Wednesday, December 9, 2015 10:35 AM
To: [email protected]<mailto:[email protected]>
Subject: Re: Licensing error R2-SP2 (was ""86269SFTIMSIB_2016_0F")
I’ve changed the title of the thread to make it more meaningful and perhaps
get it noticed better...
Would be nice, if someone from Autodesk could look into this issue,
while the software technically is still supported.
I’m not on subscription any more,
so I have no other way to bring this to their attention...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de
From: Leendert A. Hartog<mailto:[email protected]>
Sent: Tuesday, December 8, 2015 4:29 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: ""86269SFTIMSIB_2016_0F"
After having stopped the server, setting the FLEXLM_DIAGNOSTICS to 3 and
running XSI.bat, all I get is the “there is no interactive network license
(...)” error and nothing in the command window...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com & xsiforum.de
From: Stephen Blair<mailto:[email protected]>
Sent: Tuesday, December 8, 2015 4:18 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: ""86269SFTIMSIB_2016_0F"
When Softimage can get a license, you won't see anything from
FLEXLM_DIAGNOSTICS=3
The license manager should show what licenses are checked out.
If you really wanted to see what license Softimage interactive tries to
check out, you'd have to stop the license server and then start Softimage
with FLEXLM_DIAGNOSTICS set.
Softimage 2015 SP1 will cascade through the licenses like this:
Feature: 86269SFTIM_2015_0F
Feature: 86270SIECS_2015_0F
Feature: 86458SIECS_2016_0F
Feature: 863983DSMXS_2015_0F
Feature: 864733DSMXS_2016_0F
Feature: 86400MAYAS_2015_0F
Feature: 86441MAYAS_2016_0F
Feature: 86243ENCSU_2015_0F
Feature: 86435ENCSU_2016_0F
Feature: 86248ESEC_2015_0F
---------------------------
Autodesk® Softimage® 2015
---------------------------
Error: there is no interactive network license available to run Autodesk
Softimage 2015.
Would you like to run in Standalone mode?
---------------------------
Yes No
---------------------------
Feature: SFTIM_F_S
On Tue, Dec 8, 2015 at 9:38 AM, Leendert A. Hartog
<[email protected]<mailto:[email protected]>> wrote:
The regular Softimage interface runs without errors, even started from the
command prompt with “FLEXLM_DIAGNOSTICS” set to 3...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> &
xsiforum.de<http://xsiforum.de>
From: Ponthieux, Joseph G. (LARC-E1A)[LITES II]<mailto:[email protected]>
Sent: Tuesday, December 8, 2015 3:27 PM
To: [email protected]<mailto:[email protected]>
Subject: RE: ""86269SFTIMSIB_2016_0F"
The Softimage 15 R2 interface runs though, correct? Even though your license
lists the item 86269SFTIMSIB_2015_0F. Its only the batch gives the error?
--
Joey Ponthieux
LaRC Information Technology Enhanced Services (LITES II)
Science Systems and Applications Inc. (SSAI)
NASA Langley Research Center
__________________________________________________
Opinions stated here-in are strictly those of the author and do not
represent the opinions of NASA or any other party.
From:
[email protected]<mailto:[email protected]>
[mailto:[email protected]<mailto:[email protected]>]
On Behalf Of Jens Lindgren
Sent: Tuesday, December 08, 2015 7:29 AM
To: [email protected]<mailto:[email protected]>
Subject: Re: ""86269SFTIMSIB_2016_0F"
The Softimage that is boundled with 2016 products is called Softimage 2015
(SP2) R2. R2 menas it will use 2016 licenses, H instead of G in product key.
So I'm guessing you just need to get the 2016 license from AD.
On Tue, Dec 8, 2015 at 1:00 PM, Leendert A. Hartog
<[email protected]<mailto:[email protected]>> wrote:
This is 2015 SP2 (the one bundled to MayaS 2016)
From: Leendert A. Hartog<mailto:[email protected]>
Sent: Tuesday, December 8, 2015 12:53 PM
To: [email protected]<mailto:[email protected]>
Subject: ""86269SFTIMSIB_2016_0F"
Hi list,
while trying to check out a batch license, I get the following errors (after
setting “ FLEXLM_DIAGNOSTICS to 3”) as attached to this mail.
Weird thing is FlexLM seems to want to check out “86269SFTIMSIB_2016_0F” ,
which (due to the EOL) doesn’t exist...
Greetz
Leendert
AKA Hirazi Blue
Softimage hobbyist, admin at si-community.com<http://si-community.com> &
xsiforum.de<http://xsiforum.de>
--
Jens Lindgren
------------------------------------
VFX Supervisor & Lead TD
Magoo 3D Studios<http://www.magoo3dstudios.com/>
