huh 3 switches?
On Wed, May 7, 2008 at 8:23 PM, Tony Parks <[EMAIL PROTECTED]> wrote: > Hi Jim, > > With Tom's new code for 40 center fequrencies three panel mounted toggle > switchs plus a pushbutton switch work well. Set the three switches for the > bank, (one of five), push and release the pushbutton to set the bank, and > then set the three toggle switches to the desired frequency in the selected > bank, (one of eight possible). > > 73, > Tony KB9YIG > > ----- Original Message ----- > *From:* James R. Elledge <[EMAIL PROTECTED]> > *To:* [email protected] > *Sent:* Wednesday, May 07, 2008 3:19 PM > *Subject:* [softrock40] Re: Where Is It??? > > Thanks Tony, this bank switching will take a little time to get used > to, the DIP switches have to go (UG!!!). Panel mounted sw's for me. > > Jim - KB2XJ > > --- In [email protected], "Tony Parks" <[EMAIL PROTECTED]> wrote: > > > > Hi Jim, > > > > The Lite+Xtall beta kits have been mailed with Tom's v2.4 code with > the following center frequency info: > > > > The assumption is that the Lite+Xtall will be used with a soundcard > > that can sample at 96 kHz and that +/-46 kHz from a center > frequency > > will be covered. A CW and phone center frequency is included for > > most of the bands with actual Si570 frequencies listed below in > > parentheses at 4x of each of the center frequencies. > > > > 160m 1.846 (7.384) 1.892 (7.568) > > > > 80m 3.546 (14.184) 3.846 (15.384) > > > > 40m 7.046 (28.184) 7.221 (28.884) > > > > 30m 10.146 (40.584) > > > > 20m 14.046 (56.184) 14.271 (57.084) > > > > 17m 18.114 (72.456) > > > > 15m 21.046 (84.184) 21.321 (85.284) > > > > 12m 24.936 (99.744) > > > > 10m 28.046 (112.184) 28.092 (112.368) 28.346 > > (113.384) > > > > 73, > > Tony KB9YIG > > > > ----- Original Message ----- > > From: James R. Elledge > > To: [email protected] <softrock40%40yahoogroups.com> > > Sent: Wednesday, May 07, 2008 1:43 PM > > Subject: [softrock40] Where Is It??? > > > > > > Getting hard to find current info in the files area!!! > > > > Where is the chart for the 12F683 shipped with the V8.x stuff > (switch > > settings vs output freq)??? > > > > Random flipping switches does show some output freq changes, > where is > > chart???? > > > > Jim - KB2XJ > > > > > -- Jose Bonanca (CT1aos)
