Kinda sounds like the "good ol' days of making the old H-8 smart enough to read the 'paper tape' ",. doesn't it"
...bc ----- Original Message ----- From: "Tony Parks" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, May 07, 2008 3:23 PM Subject: Re: [softrock40] Re: Where Is It??? Hi Jim, With Tom's new code for 40 center fequrencies three panel mounted toggle switchs plus a pushbutton switch work well. Set the three switches for the bank, (one of five), push and release the pushbutton to set the bank, and then set the three toggle switches to the desired frequency in the selected bank, (one of eight possible). 73, Tony KB9YIG ----- Original Message ----- From: James R. Elledge To: [email protected] Sent: Wednesday, May 07, 2008 3:19 PM Subject: [softrock40] Re: Where Is It??? Thanks Tony, this bank switching will take a little time to get used to, the DIP switches have to go (UG!!!). Panel mounted sw's for me. Jim - KB2XJ --- In [email protected], "Tony Parks" <[EMAIL PROTECTED]> wrote: > > Hi Jim, > > The Lite+Xtall beta kits have been mailed with Tom's v2.4 code with the following center frequency info: > > The assumption is that the Lite+Xtall will be used with a soundcard > that can sample at 96 kHz and that +/-46 kHz from a center frequency > will be covered. A CW and phone center frequency is included for > most of the bands with actual Si570 frequencies listed below in > parentheses at 4x of each of the center frequencies. > > 160m 1.846 (7.384) 1.892 (7.568) > > 80m 3.546 (14.184) 3.846 (15.384) > > 40m 7.046 (28.184) 7.221 (28.884) > > 30m 10.146 (40.584) > > 20m 14.046 (56.184) 14.271 (57.084) > > 17m 18.114 (72.456) > > 15m 21.046 (84.184) 21.321 (85.284) > > 12m 24.936 (99.744) > > 10m 28.046 (112.184) 28.092 (112.368) 28.346 > (113.384) > > 73, > Tony KB9YIG > > ----- Original Message ----- > From: James R. Elledge > To: [email protected] > Sent: Wednesday, May 07, 2008 1:43 PM > Subject: [softrock40] Where Is It??? > > > Getting hard to find current info in the files area!!! > > Where is the chart for the 12F683 shipped with the V8.x stuff (switch > settings vs output freq)??? > > Random flipping switches does show some output freq changes, where is > chart???? > > Jim - KB2XJ >
