--- In [email protected], "dalepavlicek" <[EMAIL PROTECTED]> wrote:
>
> I would like to use a softrock ,basically as a band scope/panadapter
> with my current rig Icom Ic-775dsp.The IF on the icom is 69.015 mhz. I
> have looked at other units..space rf, the Iq, but the costs to do what
> I want are out of site 500.00+. All I want to do is set up a simple
> bandscope that will follow the vfo of the 775 with a center tune point.
> There does not need to be interaction between the radio and scope to
> make it useful..Ie click and tune etc like the flex does.
> Iam new to the SDR system and there is lots I do not understand. Iam
> looking at this point for guideance as where to look for info on what I
> want to do and if the soft rock is capable of doing it,with or without
> mod or add on.
> would be greatful for any guideance on this.
> thanks
> dale wt4t
>
You can try the second IF that is 9.016 MHz and the SoftRock40 can
handle this frequency. I hope that Tony can provide the right xtal.
73
Avner
