The bad news is you have two filters to through (one at RF and another at IF 9.015) depending on their characteristic you may be very limited on the panadapter display range. A full panadapter may be attainable at a point ahead of the 69MHZ filter.
73, Ray, N0FY SKCC 3704 FH 997 _____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of a.drory Sent: Saturday, June 14, 2008 1:44 PM To: [email protected] Subject: [softrock40] Re: softrock as a scope with hi if frequency. --- In [EMAIL PROTECTED] <mailto:softrock40%40yahoogroups.com> ups.com, "dalepavlicek" <[EMAIL PROTECTED]> wrote: > > I would like to use a softrock ,basically as a band scope/panadapter > with my current rig Icom Ic-775dsp.The IF on the icom is 69.015 mhz. I > have looked at other units..space rf, the Iq, but the costs to do what > I want are out of site 500.00+. All I want to do is set up a simple > bandscope that will follow the vfo of the 775 with a center tune point. > There does not need to be interaction between the radio and scope to > make it useful..Ie click and tune etc like the flex does. > Iam new to the SDR system and there is lots I do not understand. Iam > looking at this point for guideance as where to look for info on what I > want to do and if the soft rock is capable of doing it,with or without > mod or add on. > would be greatful for any guideance on this. > thanks > dale wt4t > You can try the second IF that is 9.016 MHz and the SoftRock40 can handle this frequency. I hope that Tony can provide the right xtal. 73 Avner
