Liu,
Please see more clarification in line.

Le 2012-02-24 à 13:21, liu dapeng a écrit :

> 2012/2/23, mohamed.boucad...@orange.com <mohamed.boucad...@orange.com>:
>> Dear Dapeng,
>> 
>> Are you considering the endpoint (host or CPE) as part of the service
>> provider's network?
>> 
>> If not, please read the definition again with the answer in mind.
> 
> Hi Med,
> 
> Yes, I am considering CPE. There are two reasons:
> 
> 1. The definition of "stateless" should not be bind to the provider's
> network.

Agreed.

> The document should define "stateless" for the Internet not
> only for the operator.

Because the document deals only with solutions deployed within individual ISP 
networks (similar in that to 6rd), it is AFAIK right to limit its stateless 
concern to individual ISP network.

> 
> 2. Even for CPE itself, in many cases, it should be considered as
> provider's network since operator need to control/configure the CPE
> remotely in that case.

Agreed that CPEs, are part of the model.
But the important point AFAIK is that, "stateless 4/6 solution" is defined in 
the document itself as meaning without "per-user state".
All under-study solutions that refer to this draft are without "per-user" 
state" in "active data plane network elements". They are therefore din scope of 
this draft.
If a CPE includes a NAT for its IPv4 operation (with states that are per only 
session states, and only IPv4), the 4/6 solution proper remains without 
"per-user state".

Considering that publication of this draft is much expected to pursue the work 
on solutions themselves, and that it isn't freezing a standard (just clarifying 
a need that too many wanted to better understand), could you then agree that 
the draft can proceed as is.

Thank you,
RD


> 
> regards,
> Dapeng Liu
> 
> 
>> Cheers,
>> Med
>> 
>>> -----Message d'origine-----
>>> De : liu dapeng [mailto:maxpass...@gmail.com]
>>> Envoyé : jeudi 23 février 2012 12:04
>>> À : BOUCADAIR Mohamed OLNC/NAD/TIP
>>> Cc : Softwire Chairs; softwires@ietf.org
>>> Objet : Re: [Softwires] Closing
>>> draft-ietf-softwire-stateless-4v6-motivation
>>> 
>>> Hi Med,
>>> 
>>> I think it is still not clear about the definition of "stateless", in
>>> current draft, it says:
>>> 
>>> stateless denotes a solution which does not require any per-user state
>>> (see Section
>>> 2.3 of [RFC1958]) to be maintained by any IP address sharing
>>> function in the Service Provider's network.
>>> 
>>> But all the candidate solutions: MAP-T/MAP-E/4rd-U all need to maitain
>>> state in CPE. It is obviously contradictory with this definition. We
>>> need more discussion regarding the definition of "stateless".
>>> 
>>> regards,
>>> Dapeng Liu
>>> 
>>> 2012/2/20, mohamed.boucad...@orange.com
>>> <mohamed.boucad...@orange.com>:
>>>> Dear chairs, WG members,
>>>> 
>>>> The answers received so far are in favour of initiating a
>>> WG LC on this
>>>> document.
>>>> 
>>>> As an editor of the document, I would like to progress this
>>> document for the
>>>> next IETF meeting. Chairs, could you please issue the WG LC? Thanks.
>>>> 
>>>> Cheers,
>>>> Med
>>>> 
>>>>> -----Message d'origine-----
>>>>> De : francis.dup...@fdupont.fr [mailto:francis.dup...@fdupont.fr]
>>>>> Envoyé : samedi 11 février 2012 09:30
>>>>> À : BOUCADAIR Mohamed OLNC/NAD/TIP
>>>>> Cc : softwires@ietf.org
>>>>> Objet : Re: [Softwires] Closing
>>>>> draft-ietf-softwire-stateless-4v6-motivation
>>>>> 
>>>>> In your previous mail you wrote:
>>>>> 
>>>>>> (1) Either issue a WG LC, or
>>>>> 
>>>>> +1
>>>>> 
>>>>> francis.dup...@fdupont.fr
>>>>> 
>>>> _______________________________________________
>>>> Softwires mailing list
>>>> Softwires@ietf.org
>>>> https://www.ietf.org/mailman/listinfo/softwires
>>>> 
>>> 
>>> 
>>> --
>>> 
>>> ------
>>> Best Regards,
>>> Dapeng Liu
>>> 
> 
> 
> -- 
> 
> ------
> Best Regards,
> Dapeng Liu
> _______________________________________________
> Softwires mailing list
> Softwires@ietf.org
> https://www.ietf.org/mailman/listinfo/softwires

_______________________________________________
Softwires mailing list
Softwires@ietf.org
https://www.ietf.org/mailman/listinfo/softwires

Reply via email to